Description | Customer reviews

The No.1 complaint with using a plunge router in the router table is the inability to raise the collet high enough to easily remove and install cutters. Access to the spindle lock button and collet nut are severly restricted when mounted in a table. Lack of collet height also limits most 1/4" and 1/2" shank cutters from being inserted far enough into the collet to work safely and prevent possible shank failure. The only way to extend the reach of these collets is to use an extension. Dynamically balanced and machined from fatigue proof steel, the Xtreme Xtension fits into any 1/2" collet and extends the cutters 1 1/4". The single tools cutter changing eliminates searching for and holding the spindle lock while securing the collet with a wrench. The extensions 1" deep bore provides support for even the shortest shank cutters. Use the included 1/4"x1/2" reduction sleeve to safely support your 1/4" shank cutters.

Description | Specifications | Customer reviews

Description | Customer reviews

Name: Ian Thompson. Rating: 5/5
This is a little more expensive than (some of) it's rivals, but on closer inspection the quality is spot on. The extra reach from under the table (1 1/4" or so) is ample. Best of all though is the hex key bit change, which is worth the price alone. Did take a few attempts to set straight in my collet, but instructions state this.

Enter your review | Close