Dust Collection

Jubilee clips are excellent at keeping hoses in place for permanent dust extraction but are not so convenient if one extraction hose has to be swapped between different machines. You could try and ge...

Fitted with a plastic coated steel thumb key for fast and simple clamping of 4" diameter hose. Supplied two to a pack. ©

These metal hose hangers offer a simply yet effective method of supporting 4" hose around the workshop. Supplied without screws it is recommended that one hanger is used every 500mm. ©

This 4" joiner suits all industry standard 4" hose and allows you to exend the length of your dust exractor hose. ©

This connector has a 4" external diameter along its entire length making it the ideal way to connect 4" hoses to 4" dust ports or for connecting similar 4" internal diameter fittings in a dust extract...

Used for connecting smaller woodworking machines to 4" dust extraction systems, this tapered connector has an external diameter of 4" at one end with the other end tapering down to an external diamete...

An effective way of supporting hoses and pipes running around the workshop, these brackets will fasten directly to the workshop wall or ceiling. Made from tough, moulded plastic, these brackets will ...

These quick adaptors will connect hoses to machines quickly and effectively. One end of the hose is threaded and screws directly into the ribbed dust hose holding firm without the need for jubilee cl...

Move from machine to machine with speed and ease by adding this tapered quick connector to the end of your hose. It simply pushes on with a friction fit to any 100mm port outlet. ©

Designed to join to hoses around corners this elbow has a smooth inner curve that reduces clogging.Acceps all indusrty standard 4" hose. ©

These quick adaptors will connect hoses to machines quickly and effectively. One end of the hose is threaded and screws directly into the ribbed dust hose holding firm without the need for jubilee cl...

This swivel fitting is ideal for use with any 4" hose which is attached to a movable piece of equipment or on a dust extractor with a hose that is constantly being swapped from one piece of equipment ...

Featuring threaded ports on both sides, this 4" blast gate is designed to fit between two hoses offering a secure connection without the need for hose clamps. Made from tough ABS plastic, this blast ...

Never bend down to pick up shavings again. This innovative dust collection port sits at floor level so dust, shavings and chippings can be swept directly in to it. With a generous 24" mouth and 4" c...

This 4" blast gate is designed for extraction systems where more than one machine is linked to the dust extractor.To maintain the optimum air flow you simply close off the blast gate to machines not i...

This 4" T joint allows you to make a branch in your ducting system. ©

This 4" Y joiner gives you the ability to link more than one machine to your dust source.Normally fitted horizontally. ©

Made from aluminium, this 4" blast gate has a gate that slides all the way through the cast body pushing out any accumulated dust or debris every time it is opened. Designed for a 4" system, the port...

Now there is no excuse for not having a clean workshop with this handy dust collection cleaner attachment. Fitting directly onto a 4" hose, this dust collection attachment turns your dust extactor in...

This high grade hose is made from a clear PVC that has wired ribs for strength. You can now see any swarf build up or clogging and quickly remedy the situation. Measuring 10 foot in length and 4" in ...

The ideal space saving hose for the workshop, these highly flexible hoses compress down to only 25% of their 20ft extended length. Perfect for use when one hose has to be swapped between many machine...

Containing everything needed to start creating your own workshop extraction system, this dust extraction kit features a number of different machine attachments. Based on a 100mm diameter system, this...