Description | Customer reviews | Delivery

Manufactured from cast iron this trimmer is designed for finish trimming of picture frames and mouldings.You simply rough cut the moulding to size and then using the substantial cast lever slice the moulding to the desired angle.It will leave a mirror/glass like finish for perfect mitre joints.Two fully adjustable fences allow for any angle of trimming and the fences have pre set positive locks at 45 and 90 degrees, a thumb screw locks all other angles.This professional trimmer will handle 150mm wide or 100mm tall mouldings.The HSS blades are ready honed and can quickly and easily be removed for resharpening.When not in use the lever can be removed to aid safety.If you are looking for a first class finish this impressive trimmer will not let you down. ©

Description | Specifications | Customer reviews | Delivery

Description | Customer reviews | Delivery

Name: Alan Jones. Rating: 5/5
I have been using this device for some months now and would'nt be without it. If you are a low volume framer like my myself this mitre trimmer is for you. It leaves a perfect face for joining and is fast and easy to use. A tip.Make an extention to base for supporting longer lengths of moulding. The only downside is a lack of spare blades. Al Jones..Design Digital

Name: Robert Edwards. Rating: 5/5
As a kitchen fitter and floor layer I find this mitre trimmer invaluable for all my angle finish work. The clean, feather free finish is far superior to any mitre saw finish and you can achieve far greater control and accuracy.After 2 years the blades have only been sharpened once. I used my Tormek grinder and it was a doddle to re establish the edge. If you do a lot of fine woodwork this mitre trimmer will save you time and give a better finish than any mitre saw.

Name: Peter Amsden. Rating: 5/5
Truly does everything is says on the label. very sturdy tool that does give a mirror cut at a precise angle. If you are making frames you should not be without one.

Name: Simon. Rating: 5/5
First class tool. The blades will handle lots and lots of resharpening. I am going to order another one just so I have two sets of blades so it can still be used while one pair are sent for sharpening. I use this tool mainly for shaving polymer picture mouldings which are usually quite brittle and it works a treat. The sprung loaded 45 degree stops in the base are a nice touch. The channel the blades slide in is made to close tolerances and I am very impressed with this tool.

Description | Customer reviews | Delivery

UK, Ireland & Channel Isles Delivery

Export Delivery

We deliver throughout mainland Europe within 5 working days
See our export delivery page for delivery charges.

*Heavy Products: Some heavier products are subject to a delivery charge of £19.95 for UK deliveries. This is shown in the product description where applicable.

Enter your review | Exit