Description | Customer reviews | Delivery

Similar in size to a standard No 3 smoothing plane, this low-angle smoother has a bed angle of 12 degrees and a blade bevel angle of 25 degrees giving a combined angle of 37 degrees. The lower working angle makes this the plane of choice when working end grain or exotic timbers as it minimises tearing to the wood fibres. Being smaller and lighter than a No 4 smoother, this plane is easier to handle and proves less fatiguing to use for long periods of time. Used for the final finishing of surfaces, shooting mitres and end grain work, this plane has a narrow 45mm wide, 3mm thick blade making it ideal for smaller, finer work. The ductile cast iron body is precision machined and ground and at the front a movable toe allows you to open and close the mouth of the plane. A stop-screw in the throat offers easily repeatable setting of the mouth and stops damage to the blade by preventing contact between the blade and toe. Setting the blade is both simple and very accurate using the Norris type adjuster. Set screws support the blade on either side preventing it from shifting in use. The front knob and rear handle are bubinga. This plane measures 225mm long, 66mm wide and weighs 1.25kg. Made in Canada. ©

Description | Specifications | Customer reviews | Delivery

Description | Customer reviews | Delivery

Write the first review for this product

Description | Customer reviews | Delivery

UK, Ireland & Channel Isles Delivery

Export Delivery

We deliver throughout mainland Europe within 5 working days
See our export delivery page for delivery charges.

*Heavy Products: Some heavier products are subject to a delivery charge of £19.95 for UK deliveries. This is shown in the product description where applicable.

Enter your review | Exit