Jubilee clips are excellent at keeping hoses in place for permanent dust extraction but are not so convenient if one extraction hose has to be swapped between different machines. You could try and ge...

The less severe the angle, the more efficient the air flow around it. This 45 degree corner will allow 2 1/2" extraction hoses to go around corners that are more obtuse than 90 degrees. ©

Used with the 2 1/2" clear tubes to join two lengths together. ©

Most clogging in a dust extraction system occurs in corners. This 90 degree jointer has a smooth inner sweep to reduce the risk of clogging and improve airflow through the system. For use with a 2 1...

This T joiner fits on to the 2 1/2" rigid hoses and allows you to create a branch in your ducting for the connection of a machine. ©

Fitted with a plastic coated steel thumb key for fast and simple clamping of 2 1/2" diameter hose. Supplied two to a pack. ©

This dust port is used by woodworkers who are making there own bespoke extraction systems. It is frequently fitted to the rear of router table fences and home made jigs. The port is designed to accept...

For 2 1/2" fixed dust extraction systems. This rigid, 3' clear plastic hose can be cut to length where required. Use the 1/2" pipe connectors to join two lengths together. ©

Designed for use with 2 1/2" extraction systems where more than one machine will be connected to the system. When the machine is not in use, close the blast gate for improved extraction where it is n...

perfect for connecting any 2 1/2" hose system to a 2 1/4" dust port, this reduction fitting features a thread for the hose to screw on to on the 2 1/2" diameter side and a smooth 2 1/4" diameter side ...