Brad Nailer & Micro Pinner Combo Kit

This nailer combo kit features an 18g brad nailer and a 23g micro pinner allowing it to take care of all of your finish nailing needs. The 18g brad nailer fires headless brads ideal for fixing mouldings, trim, window casings and picture frames and the 23g micro pinner is pefect for very fine nailing such as fastening glazing strips to windows or fine trims and decorative mouldings to cabinets and furniture.

 
Sale [69.85]   |   Save [70.10]
 
TAKE A LOOK >>
 
 
 
 
 

Complete Door & Drawer Making Router Bit Set -1/2"

Featuring six router cutters, this door and drawer making set will allow you to produce all types of doors and drawers including cabinet doors and raised panel doors and drawer fronts. Featuring ogee rail and stile cutters and a matching undercutting raised panel door cutter, this set also comprises a drawer lock joint cutter, a reversible glue joint cutter and an edge moulding bit.

 
Sale [57.85]   |   Save [62.10]
 
TAKE A LOOK >>
 
 
 
 
 


Lock Mitre Bit

The lock mitre cutter can be used for producing perfect fitting mitre joints when making drawers and boxes or it can be used as a glue joint cutter when joining boards for table tops. Router table use only.

 
Sale [19.85]   |   Save [24.10]
 
TAKE A LOOK >>
 
 
 
 
 

Set of 25 Brad Point Drill Bits - Metric

This comprehensive set contains 25 drill bits ranging in size from 1mm to 13mm in 0.5mm increments. Made from high speed steel, these brad point bits have central spurs to keep the drill aligned in the wood and sharp cutting tips to slice through the wood rather than tear it for a clean accurate finish.

 
Sale [11.85]   |   Save [18.10]
 
TAKE A LOOK >>
 
 
 
 
 

Auto Lock Clamp for 1/2" T Track

Manufactured from rugged steel and aluminium construction, you will find that tightening this new Auto Lock T Track Clamp is literally an open and shut case. You simply slide the clamp face up to your work and close the lever. Once set, the clamping pressure is always the same regardless of workpiece size, and is adjusted only if needed with the set screw.

 
Sale [24.85]   |   Save [15.10]
 
TAKE A LOOK >>
 
 
 
 
 
T Track Slider Kit

T Track
Slider Kit

 
Sale [6.85]   |   Save [4.10]
 
TAKE A LOOK >>
Wooden Pocket Hole Plugs - Oak Pack of 50

Wooden Pocket Hole Plugs
- Oak Pack of 50

 
Sale [4.85]   |   Save [6.10]
 
TAKE A LOOK >>
T9 Boeshield - Xtra Large 12oz

T9 Boeshield
- Xtra Large 12oz

 
Sale [16.85]   |   Save [13.10]
 
TAKE A LOOK >>
 
 
 
 
 


Xact Deluxe Router Table

This new full size router table represents exceptional value for money. With its generously sized worktop measuring 800mm x 600mm it offers more table room and therefore more work piece support, than most other router tables. The table top is laminated on both faces to allow the work piece to glide back and forth, sandwiched between a core of 35mm thick highly pressurised MDF, preventing the table from bowing even under the weight of the heaviest of routers. A hardened 3/4" T Track running the full length of the table will accept all industry standard feather boards and mitre gauges.

 
Sale [115.85]   |   Save [74.10]
 
TAKE A LOOK >>
 
 
 
 
 


Multi Tool 20 Piece
Professional Blade Set

Compatible with many brands of powered multi tool such as Fein Multimaster, Bosch, Smart and many others, this 20 piece professional blade set allows you to perform a wide range of tasks. 34mm and 68mm precision wood blades give you clean, rapid trimming of wooden doors, jambs and skirtings. 32mm and 45mm bi-metal blades will cut reclaimed wood, including any hidden nails, hardboard, drywall, plastics and even non-ferrous metals.

 
Sale [26.85]   |   Save [23.10]
 
TAKE A LOOK >>
 
 
 
 
 
Jig Hardware Kit for 1/2

Jig Hardware Kit
for 1/2" T Track

 
Sale [14.85]   |   Save [25.10]
 
TAKE A LOOK >>
Set of 5 Self Centering Hinge Bits in Wooden Case

Set of 5 Self Centering
Hinge Bits

 
Sale [12.85]   |   Save [20.10]
 
TAKE A LOOK >>
Double Dowel Jig

Double Dowel Jig
with Steel Bushings

 
Sale [14.85]   |   Save [24.10]
 
TAKE A LOOK >>
 
 
 
 
 

Electric Nailer & Stapler
with Impact Control

This nailer/stapler will fire up to 20 times per minute which is ideal when fast action is required when stapling fabric to chair and bed frames or when making frames for kitchen cupboards.

 
Sale [18.85]   |   Save [31.10]
 
TAKE A LOOK >>
 
 
 
 
 

18 Gauge Electric Stapler & Nailer

This electric nailer allows for fast and efficient firing of 15mm nails and 8mm to 14mm staples. It features a jam free, quick reload magazine and can fire twenty fastenings per minute.

 
Sale [29.85]   |   Save [9.10]
 
TAKE A LOOK >>
 
 
 
 
 

Heat Gun with Temperature Control
& 3 Fan Settings

This gun has three fan settings that control the speed of the heat and each of the three fan settings then has ten adjustable heat settings ranging from 50°C to 600°C at air flow rates from 250 litres per minute to 500 litres per minute.

 
Sale [24.85]   |   Save [15.10]
 
TAKE A LOOK >>
 
 
 
 
 

Heavy Duty Hand Stapler & Nailer

Constructed of an all steel body for increased durability and longevity, this hand held staple and nail gun offers the versatility of firing 6mm to 14mm staples and 15mm nails. Capable of working with both hard and soft woods, mdf and composite materials and is an essential tool when beading, making frames and completing upholstery work.

 
Sale [9.85]   |   Save [23.10]
 
TAKE A LOOK >>
 
 
 
 
 

Framing Nailer 2" to 3 1/2"

This nailer fires 2.8mm and 3.1mm diameter ring shank, D head nails from 2" to 31/2" in length. It is designed for first fix applications such as fixing studded walls, joists, roofing framework, decking, flooring and fencing.

 
Sale [199.85]   |   Save [100.10]
 
TAKE A LOOK >>
 
 
 
 
 

TCT Router Cutter Set
- 66 Piece x 1/2" Shank

This has to be the ultimate, multi purpose router cutter set. Each cutter is computer balanced and combined with the anti kick back design gives a smooth chatter free cut.

 
Sale [148.85]   |   Save [91.10]
 
TAKE A LOOK >>
 
 
 
 
 
6 Piece Cove Cutter TCT Router Bit Set - 1/2

6 Piece Cove Cutter TCT Router Bit Set - 1/2"

 
Sale [49.85]   |   Save [40.10]
 
TAKE A LOOK >>
6 Piece Trim Router Bit Set

6 Piece Trim
Router Bit Set

 
Sale [39.85]   |   Save [40.10]
 
TAKE A LOOK >>
2 Piece Shaker Jointer TCT Router Bit Set - 1/2

2 Piece Shaker Jointer
TCT Router Bit Set - 1/2"

 
Sale [38.85]   |   Save [31.10]
 
TAKE A LOOK >>
 
 
 
 
 
11 Piece Dovetail TCT Router Bit Set - 1/4

11 Piece Dovetail
TCT Router Bit Set - 1/4"

 
Sale [39.85]   |   Save [50.10]
 
TAKE A LOOK >>
3 Piece Down Cut Router Bit Set

3 Piece Down Cut
Router Bit Set

 
Sale [69.85]   |   Save [60.10]
 
TAKE A LOOK >>
Professional Finger Joint TCT Router Bit - 1/2

Professional Finger Joint
TCT Router Bit - 1/2"

 
Sale [34.85]   |   Save [25.10]
 
TAKE A LOOK >>
 
 
 
 
 
Door Edge Bit - D=2

Door Edge Bit

 
Sale [18.85]   |   Save [27.10]
 
TAKE A LOOK >>
Drawer Lock Bit - D=1 1/4

Drawer Lock Bit

 
Sale [19.85]   |   Save [9.10]
 
TAKE A LOOK >>
Set of 3 Tornado Kitchen Worktop Cutters - D=1/2

Set of 3 Worktop Cutters

 
Sale [29.85]   |   Save [25.10]
 
TAKE A LOOK >>
 
 
 
 
 



Feather Board Super Kit

This Super Kit consists of 4 x feather boards, 2 x spacer blocks and all the mounting hardware needed to either create four individual feather boards or two double stacked feather boards for use with tall stock cutting operations.

 
Sale [29.85]   |   Save [40.10]
 
TAKE A LOOK >>
 
 
 
 
 
Hardware Kits for Mitre Slots - Pack of 2

Hardware Kits for Mitre Slots
- Pack of 2

 
Sale [6.85]   |   Save [4.10]
 
TAKE A LOOK >>
Workpiece Stop for 1/2

Workpiece Stop
for 1/2" T Track System

 
Sale [6.85]   |   Save [6.10]
 
TAKE A LOOK >>
Biscuits - Mixed Bumper Pack

Biscuits
Mixed Bumper Pack

 
Sale [12.85]   |   Save [17.10]
 
TAKE A LOOK >>
 
 
 
 
 


Flip Stop with 48" Track - 1/2" Wide

Consisting of an aluminium 48" long T track and cast aluminium flip stop this unit is designed for use with home made extension fences for mitre and radial arm saws.

 
Sale [29.85]   |   Save [10.10]
 
TAKE A LOOK >>
 
 
 
 
 
Ratchet Handle - Female

Ratchet Handle - Female

 
Sale [3.85]   |   Save [2.10]
 
TAKE A LOOK >>
Hex Nut x 10

Hex Nut x 10

 
Sale [2.85]   |   Save [3.10]
 
TAKE A LOOK >>
Machine & Blade Wax Extra Large 400g - Pack of 3

Machine Wax - Pack of 3

 
Sale [18.85]   |   Save [11.00]
 
TAKE A LOOK >>
 
 
 
 
 

Precision Mitre Gauge
with Extendable Fence

This is a heavy-duty precision mitre gauge designed as an upgrade to economy mitre gauges that are frequently supplied with new bench top or floor standing machines. The slide bar is manufactured from hardened tool steel and measures 18mm wide by 8mm deep by 450mm long and will fit all industry standard tables.

 
Sale [28.85]   |   Save [31.10]
 
TAKE A LOOK >>
 
 
 
 
 

Xact Precision Mitre Gauge

The main bar on this mitre gauge measures 18mm wide x 8mm deep x 350mm long and will fit industry standard 3/4" track or machined grooves found on table saws, router tables and bandsaws. The gauge rotates through 120° and can be set to 1° increments using the fine scale.

 
Sale [19.85]   |   Save [20.10]
 
TAKE A LOOK >>
 
 
 
 
 
Xact NVR Switch

Xact NVR Switch

 
Sale [39.85]   |   Save [15.10]
 
TAKE A LOOK >>
Zeroplay Mitre Bar System - 2 Bars and 2 Stops

Zeroplay Mitre Bar System

 
Sale [39.85]   |   Save [10.10]
 
TAKE A LOOK >>
Work Piece Holding Jig

Work Piece Holding Jig

 
Sale [14.85]   |   Save [20.10]
 
TAKE A LOOK >>
 
 
 
 
 

FeatherPro Featherboard - Pack of 2

Made in the USA, FeatherPro featherboards not only provide exceptional protection against kickback they also offer extra smooth infeed and feed back. They offer up to 40kg of kickback resistance versus standard plastic featherboards.

 
Sale [29.85]   |   Save [30.10]
 
TAKE A LOOK >>
 
 
 
 
 
Ultralight Replacement Feathers - Pack of 2

Ultralight Replacement Feathers - Pack of 2

 
Sale [9.85]   |   Save [7.10]
 
TAKE A LOOK >>
Starter Kit

Magswitch
Starter Kit

 
Sale [68.85]   |   Save [31.10]
 
TAKE A LOOK >>
Beadlock Kit

Beadlock
Jointing Kit

 
Sale [39.85]   |   Save [20.10]
 
TAKE A LOOK >>
 
 
 
 
 

Pocket Hole Alignment Clamps
with Quick Release - Pack of 4

These new pocket hole clamps ensure that the pocket hole joint is perfectly aligned every time, ready to be screwed together. They feature a 9.5mm pin that slots into a pre-drilled pocket which is then clamped under pressure bringing the two mating surfaces tightly together.

 
Sale [39.85]   |   Save [40.10]
 
TAKE A LOOK >>
 
 
 
 
 


100mm Locking Clamp Pliers
with Quick Release - Pack of 4

Supplied as a pack of 4, these mole grip style locking clamps are made from hardened steel forgings, are corrosion resistant and have a large work piece clamping capacity of 100mm.

 
Sale [26.85]   |   Save [43.10]
 
TAKE A LOOK >>
 
 
 
 
 

Set of 3 x 250mm Premium TCT
Saw Blades 24, 48 & 80 tooth

This set of three premium quality 250mm TCT saw blades comprises of a 24 tooth, 48 tooth and 80 tooth blade. These high performance blades will leave fine, feather free finishes in both hardwoods and softwoods.

 
Sale [26.85]   |   Save [43.10]
 
TAKE A LOOK >>
 
 
 
 
 

Xact Pro Router Table

This new Xact Pro router table has been 3 years in the making and offers the discerning home woodworker and professional cabinetmaker an exceptional router table at an affordable price. It is supplied as standard with three core components; precision fence, table top and leg stand.

 
Sale [138.85]   |   Save [111.10]
 
TAKE A LOOK >>
 
 
 
 
 

Xact Pro Router Table
with Insert Plate, Switch & Featherboard Kit - Kit 3

This Xact Pro Router Table with Insert Plate,
Switch & Featherboard Kit - Kit 3 contains...

 

• RTX5000 Xact Router Table
• RTX5001 Xact Insert Plate
• RTX5004 Xact NVR Switch
• DK6685 Featherboard Super Kit

 
Sale [229.85]   |   Save [170.10]
 
TAKE A LOOK >>
 
 
 
 
 

Xact Pro Router Table
with Insert Plate - Kit 1

This Xact Pro Router Table with Insert Plate - Kit 1 contains...

 

• RTX5000 Xact Router Table
• RTX5001 Xact Insert Plate

 
Sale [159.85]   |   Save [140.10]
 
TAKE A LOOK >>
 
 
 
 
 


Xact Deluxe Router Table
with Switch & Featherboard Kit

This Xact Deluxe Router Table with
Switch & Featherboard Kit contains...

 

• RTX2000 Xact Deluxe Router Table
• RTX5004 Xact NVR Switch
• DK6685 Featherboard Super Kit

 
Sale [178.85]   |   Save [121.10]
 
TAKE A LOOK >>
 
 
 
 
 



Xact Deluxe Router Table
with Switch & Featherboard Kit

This Xact Deluxe Router Table with Featherboard Kit contains...

 

• RTX2000 Xact Deluxe Router Table
• DK6685 Feather Board Super Kit

 
Sale [139.85]   |   Save [80.10]
 
TAKE A LOOK >>
 
 
 
 
 


Xact Router Lift

This premium quality router lift enables you to raise and lower your router without removing it from the table allowing you to make precise height adjustments to an accuracy of 0.01mm. The lifts unique design means that cutter height adjustments are made from the side of the table and not above the table.

 
Sale [179.85]   |   Save [90.10]
 
TAKE A LOOK >>
 
 
 
 
 

Xact Mobility Wheel Kit

Designed specifically for the RTX5000 router table this set of 4 x wheels have full rotation for fast and easy movement of the table. The wheels feature heavy duty male threads that screw into the base of the legs and each wheel can be locked off at any height.

 
Sale [19.85]   |   Save [20.10]
 
TAKE A LOOK >>
 
 
 
 
 
Premium Saw Tooth Bits - Metric - Set of 16

Premium Saw Tooth Bits
- Metric - Set of 16

 
Sale [46.85]   |   Save [33.10]
 
TAKE A LOOK >>
Pocket Hole Jig Complete Kit in Wooden Case

Pocket Hole Jig Complete Kit
in Wooden Case

 
Sale [38.85]   |   Save [31.10]
 
TAKE A LOOK >>
8 Piece Extra Long Auger Bit Set

8 Piece Extra Long
Auger Bit Set

 
Sale [29.85]   |   Save [30.10]
 
TAKE A LOOK >>
 
 
 
 
 

Universal Power Tool
Hose and Adaptor Kit

This new kit includes two sizes of flexible rubber dust ports, 1" and 1 1/2" that flex to fit on almost any tool and a 2 1/4" port that connects to most shop vacuums and dust separators.

 
Sale [36.85]   |   Save [13.10]
 
TAKE A LOOK >>
 
 
 
 
 

3" Xact Precision
Woodturning Chuck System

The compact design of this Xact chuck ensures that the workpiece sits as close as possible to the headstock therefore reducing load on the main headstock bearing and minimising vibration when turning.

 
Sale [99.85]   |   Save [70.10]
 
TAKE A LOOK >>
 
 
 
 
 

Complete Jaw Pack - 3" Woodturning Chucks: Xact, Record SC3, Viper 2

This jaw pack contains the 4 x optional jaws to suit the Xact XT8000 Precision Chuck and all the jaws are fully compatible with Record SC3, Dakota XT650 and Viper 2 chucking systems.

 
Sale [46.85]   |   Save [33.10]
 
TAKE A LOOK >>
 
 
 
 
 

4" Xact Precision
Woodturning Chuck System

This 4" woodturning chuck is precision engineered and beautifully balanced and offers a superior performance combined with rock-solid holding power and excellent load bearing capability.

 
Sale [129.85]   |   Save [70.10]
 
TAKE A LOOK >>
 
 
 
 
 


Complete Jaw Pack - 4" Woodturning Chucks: Xact, Record SC4, Supa Nova, Viper 3

This jaw pack contains the 9 x optional jaws to suit the Xact XT9000 Precision Chuck and all the jaws are fully compatible with Record SC4, Supa Nova2, Dakota XT700 and Viper 3 chucking systems.

 
Sale [149.85]   |   Save [120.10]
 
TAKE A LOOK >>
 
 
 
 
 


Woodturning Accessory Upgrade Kit 2 - For 1" x 8tpi Lathes

This premium quality upgrade kit is a collection of the most popular head and tailstock fittings. They feature the latest advancement in woodturning accessories and are designed for use on lathes with 1" x 8tpi spindle threads and No 2 morse tapers such as Draper, Delta, Axminster and Scheppach range of lathes.

 
Sale [49.85]   |   Save [50.10]
 
TAKE A LOOK >>
 
 
 
 
 

Kitchen Worktop Jig - 700mm

These jigs are CNC machined in the UK by the world's longest established manufacturer of kitchen worktop jigs. They are laminated on both sides with a 1mm thick external grade High Pressure Laminate which is sandwiched around solid moisture resistant composite core.

 
Sale [32.85]   |   Save [44.10]
 
TAKE A LOOK >>
 
 
 
 
 

Set of 170 Brad Point Drill Bits - Metric

For use in hardwoods and softwoods and featuring nineteen different diameters of drill bits from 1mm to 10mm in 0.5mm increments, these sets have ten pieces of each of the 1mm to 8mm drill bits and five pieces of each of the 8.5mm to 10mm drill bits giving a total of 170 drill bits.

 
Sale [36.85]   |   Save [43.10]
 
TAKE A LOOK >>
 
 
 
 
 

V Drill Guide Block - Metric

Manufactured in the USA with 17 metric drill guide holes ranging from 3mm to 9.5mm, this drill guide offers the stability and guidance that your drill requires to ensure each hole is drilled perfectly straight.

 
Sale [28.85]   |   Save [11.10]
 
TAKE A LOOK >>
 
 
 
 
 

Drill Block - Metric

Featuring drill guides for six of the most popular drill sizes, this drill block will offer support to your drill bit ensuring perfectly straight holes every time you drill. These guides are made from hardened steel and are highly resistant to wear.

 
Sale [9.85]   |   Save [23.10]
 
TAKE A LOOK >>
 
 
 
 
 


Quick Auger Bit Set - Set of 6

Ideal for the drilling of joists for pipework and wiring, this set of short auger bits is a useful addition to any DIY or professional toolbox. This set of seven comprises 6mm, 10mm, 13mm, 16mm, 20mm and 25mm diameter bits all with standard 1/4" hex shanks.

 
Sale [16.85]   |   Save [18.10]
 
TAKE A LOOK >>
 
 
 
 
 


Doweling Jig with Interchangeable Bushing - Metric

This precise doweling jig will allow you to quickly and accurately create strong doweled joints, such as corner joints, surface joints and edge joints, and with it's ability to clamp both boards at the same time you can be sure of precise hole alignment.

 
Sale [69.85]   |   Save [30.10]
 
TAKE A LOOK >>
 
 
 
 
 

Dowelling Jig - Metric

This CNC machined dowelling jig is manufactured in Canada by Jessem and is designed to be the most versatile, accurate and easy to use jig on the market.

 
Sale [139.85]   |   Save [30.10]
 
TAKE A LOOK >>
 
 
 
 
 

Japanese Reciprocating Wood Carver

Offering an impressive speed of 12,000 strokes per minute, this carver makes light work of the very hardest hardwoods cutting around 3-5 times faster that a rotary carver with reciprocating attachment.

 
Sale [399.85]   |   Save [150.10]
 
TAKE A LOOK >>
 
 
 
 
 

Precision Rotary Tool Complete Kit

Supplied in a canvas carry case the complete kit comes with rotary tool, power grip handle, flexi-shaft, work stand, drilling guide and a 125 piece accessory kit containing sanding, polishing, sawing, grinding and drilling bits. For model making and small scale work there is very little this premium quality tool cannot do.

 
Sale [34.85]   |   Save [35.10]
 
TAKE A LOOK >>
 
 
 
 
 


Flexi Shaft Carving Kit with Foot Pedal

This powerful carving machine has a quiet running 190 watt motor which features the most advanced rare earth magnets significantly increasing the level of torque applied through the shaft to the carving handpiece. The unit is capable of carving from speeds of 0 to 20000rpm, controlled by a foot pedal which allows for hands free operation. This complete package includes the drive unit, foot pedal control, flexi shaft, carving handpiece with fives blades and motor hanger.

 
Sale [149.85]   |   Save [50.10]
 
TAKE A LOOK >>
 
 
 
 
 

Orbiter 360° Rotational Drill Chuck

This unique accessory is set to revolutionise the way drills are used. Imagine being able to drill a hole at any angle, in any tight corner without having to tie yourself up in knots and you have some idea of what the Orbiter can do. Consisting of a handle and two body halves all able to move 360 degrees independently of each other, the Orbiter gives you the drilling scope and capability never previously offered by any other angle attachment.

 
Sale [26.85]   |   Save [33.10]
 
TAKE A LOOK >>
 
 
 
 
 


Mini Tool Stand

This new mini tool stand transforms your rotary tool into a small scale drill press. The solid steel support arm is mounted onto a 150mm square base which can rest on its own, or can be clamped or fixed to your workbench.

 
Sale [29.85]   |   Save [20.10]
 
TAKE A LOOK >>
 
 
 
 
 


Flexishaft with Keyless Chuck

This flexishaft with keyless chuck allows your cordless drill or rotary tool to access hard to reach areas or confined spaces. Measuring 900mm in length this flexishaft has a much greater flexibility than most standard shafts and has a much narrower handpiece.

 
Sale [18.85]   |   Save [16.10]
 
TAKE A LOOK >>
 
 
 
 
 
Versatile Drill Guide

Versatile
Drill Guide

 
Sale [9.85]   |   Save [23.10]
 
TAKE A LOOK >>
Mortice Chisel Sharpener

Mortice Chisel
Sharpener

 
Sale [34.85]   |   Save [9.10]
 
TAKE A LOOK >>
Cabinetmakers Cases - Bumper Pack

Cabinetmakers Cases
- Bumper Pack

 
Sale [28.85]   |   Save [26.10]
 
TAKE A LOOK >>
 
 
 
 
 

Tenoning Jig

A tenoning jig makes light work of producing tenons, dadoes and grooves in wood when used on a suitable table saw. The back stop can be set anywhere between 90 and 45 degrees and the rest anywhere between 90 and 30 degrees letting you produce standard, mitre and compound mitre tenons for furniture production.

 
Sale [69.85]   |   Save [60.10]
 
TAKE A LOOK >>
 
 
 
 
 


Micro Dial Taper Jig

This unique jig allows you to cut precise tapers with ease and repeatability on your table saw and rout profiles on your router table. By using the 'Rise Over Run Color Match' dial you can set your taper between 0" to 2" with 1/16" intervals.

 
Sale [139.85]   |   Save [40.10]
 
TAKE A LOOK >>
 
 
 
 
 

Clear Cut Stock Guides - Pair

Doing the work of both fence and table mounted featherboards in one. Using the same principle as a powered stock feed, the infeed roller is angled at 5 degrees to the fence so when the wood runs underneath it not only does it hold the wood down to the table, it also pulls it in to the fence. This ensures the wood is both flat to the table and firmly up against the fence during cutting for the most accurate results.

 
Sale [89.85]   |   Save [30.10]
 
TAKE A LOOK >>
 
 
 
 
 

Rout R Lift - Prestige

Manufactured in Canada by Jessem. The most noticable feature of this new lift is the fact that it is direct drive working from a screwed spindle. This makes it much more practical as you do not have the problems associated with belt or chain drive where belts and chains can snap or work loose over time.

 
Sale [289.85]   |   Save [60.10]
 
TAKE A LOOK >>
 
 
 
 
 


Kitchen Worktop Jig with
Set of 3 TCT Kitchen Worktop Cutters

This Kitchen Worktop Jig Set is exceptional value for money and contains everything you need to cut a range of worktop joints... Kitchen Worktop Jig - 700mm and a Set of 3 Tornado Kitchen Worktop Cutters.

 
Sale [59.85]   |   Save [60.10]
 
TAKE A LOOK >>
 
 
 
 
 

Dovetail Jig Complete Package

This jig is designed for the discerning home woodworker and the professional cabinet maker for the small scale production of cabinet drawers and boxes. Robust in its construction, the body of the jig is made from heavy gauge steel pressings that will not flex under load and the template is precision CNC machined from aluminium for improved accuracy in your work.

 
Sale [59.85]   |   Save [30.10]
 
TAKE A LOOK >>
 
 
 
 
 

Kutzall Extreme Carving Disc & Carving Dish Wheel - Set of 2

This set of two contains a Kutzall Extreme Carving Sanding Disc and a Kutzall Extreme Carving Dish Wheel... Made in the USA for serious woodcarvers, sculptors and cabinetmakers!

 
Sale [89.85]   |   Save [70.10]
 
TAKE A LOOK >>
 
 
Copyright Rutlands Limited 2000-2016
 
Total Items:0
Discounts:0
Shipping:  View delivery information 0
Total: 0
days,hours,mins,secs
It is not possible to show this image.
Loading Image. Please wait...
Loading. Please wait...
Loading. Please wait...
Please enter at least 3 characters to search for

  no suggestions found

press Enter for a
 more thorough search

keyword/product code
your email address
Enter voucher code
Please wait...