Dust Hood - 100mm

This funnel shaped, dust hood measures 340mm wide by 185mm high by 160mm deep and has a 100mm outside diameter port for connection to industry standard 102mm dust hose. The hood has a series of fixing holes and is designed to be permanently attached to a power tool or shop-made tool stands, jigs and dust hoods. It is also frequently fixed to the underside of a router table and table saw to capture dust from underneath the point of cut. The 100mm port has a series of grids to prevent large off-cuts from entering the extraction hose.

This hose fitting is made from a thermoplastic polymer, which is impact resistant, has structural strength and stiffness, and will not flex or distort under pressure. It has excellent low temperature properties and will perform in extremely cold workshops down to -40°C. The internal bore is smooth to ensure the smooth passage of dust. As all of our fittings are made to exacting and tight tolerances to prevent air loss, a top tip is to use a washing up liquid as a lubricant when initially installing. ©