• Accurate resharpening of HSS, carbide tipped and titanium nitride coated drill bits
• Easy alignment system for accurate resharpening
• Patented chuck design makes even small drill bits easy to align
• Sharpens any bit to a 118° point
• Accepts drill bits from 3/32" up to 1/2" in diameter
• Made in the USA
Keep your drill bits sharp and ready for use with the Drill Doctor sharpening system. Capable of putting the edge back on high speed steel, carbide tipped and titanium nitride coated drill bits, this machine will sharpen any bit to a 118° point. Accurate resharpening is simple using the incorporated easy align system. A special chuck holds the drill bit during sharpening and ensures that the correct geometry is maintained on the cutting edges of the bit.
By using a dual cam system on the chuck, the contours of the head of the bit are followed precisely during sharpening giving a more accurate result with the minimum amount of material removed. Powered by a 78W motor, the diamond abrasive wheel rotates at 15,000 rpm. This allows the wheel to sharpen quickly and efficiently with the smallest diameter drills only requiring around four half turns in the machine.
This machine arrived the day after I ordered it. I had around 150 dull drill bits and was fed up with the hard work a dull bit can cause. This is one of the best bits of kit I have bought for a long while, I now have a lathe that doesn't groan like it used to when I was trying to force a blunt bit through. Worth every penny.
Written By:George White
Surprised how quick and easy this machine is to use, drill bits are sharp as new and can be used again and again. Brilliant
Written By:P Sutton
Had lots of dull drill bits lying around the workshop, but with this super bit of kit they are all sharp and usable again. A great investment, saves a lot of time and money in replacing bits.