Home > Woodworking > Hand Tools > Clamps & Vices > Corner Clamps > Spring Mitre Clamp Kit
Spring Mitre Clamp Kit

Click image to zoom

Spring Mitre Clamp Kit

Rutlands    Part No. DK7018
  •  
  • • Contains a set of spring pliers and 16 spring steel clamps
  • • Used for rigidly clamping edges whilst the adhesive sets
  • • Used when gluing picture frames, skirting boards and mouldings


These spring mitre clamps are used for holding work pieces together, under heavy pressure whilst the adhesive sets. They are used for holding in place the corners of the work piece when making picture frames, joining skirting board and fixing mouldings and beadings and all general frame work. By pressing on the spring loaded pliers you expand and open the spring clamp. You then position the two ends of the spring clamp around your frame and release the pressure on the pliers. The spring clamps then close and lock rigidly onto the faces of the work piece. The set contains a pair of multi position spring pliers, and four of each of the following springs - 3 1/2", 2 3/4", 2" and 1 1/4".

95mm maximum capacity x 55mm maximum depth.
Select Option
  •  
Quantity Discounts
19.95 inc vat GBP
5.000 3 5
  • Description
  • Specifications
  • Video
  • Delivery
  • review score 5.000
      Reviews (3)
  • Write Review
  • Brand Rutlands
  • For more information please select an option below

    Choose your delivery destination
  • Rating: review score 5
    Written By: Peter Slade
    Used them for the first time whilst building a box. Works very well and holds the mitres together for glueing. I've tried lots of different ways but this is the best and easiest.
  • Rating: review score 5
    Written By: Steven Moore
    Tried these out whilst 2nd fixing, cut all architrave to size, cleared a floor area for gluing up, 1st set flat on floor glued mitre joints and set spring clamp and cleaned joint, next set of arch directly on top with a piece of paper underneath joint to stop sticking to one below, and so on. whilst glue setting I went down stairs and cut arch, when finished removed spring clamps upstairs and repeated process downstairs back upstairs and pinned all arch to frames, when finished downstairs was ready for pinning to frames To summarize, all arch joints glued and tight with no fussing with a plane fitting joints saving me at least 1 to 2 hours time with a perfectly glued joint. Wish I had tried these years ago for trimming out Only gripe is I would like to buy extra spring clamps separately to have more but I just had to buy another kit, give it a go it wont cost the earth at £20 quid
  • Rating: review score 5
    Written By: Charlie
    If like me I find there's nothing more frustrating than gluing mitered corners and trying to keep them from opening up. I came across these spring clamps and have found them to be the quickest and easiest way to keep the pressure on until the glue drys and to make nice tight joints. Definitely a must have tool for trim carpentry and picture framing.
  • Copyright Rutlands Limited 2000-2017
     
    Total Items:0
    Discounts:0
    Shipping:  View delivery information 0
    Total: 0
    days,hours,mins,secs
    It is not possible to show this image.
    Loading Image. Please wait...
    Loading. Please wait...
    Loading. Please wait...
    Please enter at least 3 characters to search for

      no suggestions found

    press Enter for a
     more thorough search

    keyword/product code
    your email address
    Enter voucher code
    Please wait...