Rout R Lift - Prestige

Click image to zoom

Rout R Lift - Prestige

Jessem    Part No. 2320

• Designed and Manufactured in Canada by JessEm
• 235mm x 298mm hardened anodised aluminium insert plate
• Pre-drilled fixing ring to accept most popular models of router
• Height adjustable from above the table top using a removable crank lever
• Fits into any JessEm top with similar sized aperture and most Woodpecker tops

Manufactured in Canada by Jessem, this new Rout R Lift has a smaller top plate, is sturdier and has more features that its predecessor. The most noticable feature of this new lift is the fact that it is direct drive working from a screwed spindle. This makes it much more practical as you do not have the problems associated with belt or chain drive where belts and chains can snap or work loose over time.

A double bearing on the spindle makes the rise and fall movement of the router ultra smooth and so very effortless that the mechanism can be worked by a single finger. In use, the rise and fall mechanism is operated above the table using a removable cranked lever. This lever also operates the on board spindle lock, a new feature with this lift, which locks the router at the required height preventing it from wandering under load.

The top plate measures 235mm x 298mm and is 9.5mm thick. Made from cast, ground and hardened anodised aluminium, this plate features a generously sized router bit aperture that will accept a 92mm diameter raised panel door bit. This diameter can be reduced down to 51mm using the included insert ring. The onboard levelling system allows you to set the lift perfectly flush to your router table top.

Mounting any router in this lift is very simple. Underneath the lift the fixing ring is pre-drilled for all popular brands and models of router. Simply line up the holes that match those on your router base plate and screw your router to it. Fix your router at maximum plunge and then let the lift do all of the work. This Rout R Lift will fit into any Jessem table top with a similar sized aperture and will also fit into any of the Woodpecker table tops we sell.

Please note: The Rout R Lift is pre-drilled to suit the following routers: Hitachi M12V & M12V2, DeWalt 625, ELU 3337-9, Bosch 1617, 1604 & 1613, Makita RP2301FC, Festool OF 1400 EQ & OF 1010 EQ.
Select Option
Quantity Discounts
369.95 inc vat GBP
5.000 4 5
  • Description
  • Specifications
  • Video
  • Delivery
  • review score 5.000
      Reviews (4)
  • Write Review
  • Brand Jessem
    Country of Origin Canada
  • For more information please select an option below

    Choose your delivery destination
  • Rating: review score 5
    Written By: Keith Rooney
    A wonderful product from a very reputable company in jessem High end features and precision to booth. I have coupled this particular lift with my ls super system and digital rise and fall index from wixey. I now have an extraordinarily accurate hand built router table. I have it matched with my mafell lo65ec and can honestly say it takes precedents over my spindle moulder almost every time !!
  • Rating: review score 5
    Written By: Steffen Gyhrs
    Got this routerlift a couple of days ago from Rutlands Now I don't know how I survived without it ! Having the Makita 2301 router under the table, it was a pest to adjust the height, as the springs was quite hard , the old insertplate went out of the table every time, unless I clamped it timeconsuming and irritating After mounting the router which was very smooth, as there is predrilled holes, mounting the plate in the table, I was ready to start up. Okay the price is a bit steep, but now I will never be without this lift. A full 5 star device! Start saving out there its worth it
  • Rating: review score 5
    Written By: Dave Clarke
    My Makita 1/2" router is a heavy beast so I was a bit concerned that the lift would not be strong enough to raise and lower it. Shouldn't have worried it copes admirably. Best buy I have made in years. No more fumbling about under the table and second guessing if I've raised the cutter enough. Well engineered piece of kit.
  • Rating: review score 5
    Written By: Brian S
    I bought this lift to mount my Festool OF1400 router. The two combined make in my opinion the ultimate router table system.The movement on the Jessem lift is smooth and controlled. The cutter does not creep down even when you exert pressure. Excellent.
  • Copyright Rutlands Limited 2000-2017
    Total Items:0
    Shipping:  View delivery information 0
    Total: 0
    It is not possible to show this image.
    Loading Image. Please wait...
    Loading. Please wait...
    Loading. Please wait...
    Please enter at least 3 characters to search for

      no suggestions found

    press Enter for a
     more thorough search

    keyword/product code
    your email address
    Enter voucher code
    Please wait...