T Bar Clamp 54" Capacity - Pack of 4
T Bar Clamp 54" Capacity - Pack of 4
£129.95
inc. vat
Home > Hand Tools > Clamps & Vices > Bar Clamps > T Bar Clamp 54" Capacity - Pack of 4

Key Features

  • 60" overall length with 54" clamping capacity
  • Ideal for jointing large boards for cabinets, table tops, windows and door frames
  • T profile cold drawn steel bar offers high tensile strength for heavy duty clamping
  • T shaped bar is fully resistant to twisting and distortion under high clamping pressures
  • Exert up to 1900kg of clamping pressure per clamp
  • Hard wearing smooth running steel rolled acme thread
  • Slightly tapered jaws for true parallel clamping

Show more +

Bundles

Total: £221.75inc. vat

Product Details

It is widely acknowledged that the T bar is most resistant to twisting and distortion during clamping and these clamps with their cold drawn steel T bars are no exception. Cold drawn steel has greater tensile and yield strengths than standard hot rolled steel making these clamps capable of heavy duty, high pressure clamping, comfortably exerting up to 1900kg of pressure on the work piece.

The premium quality malleable iron slide and head are both precision machined to glide along the bar for effortless set up and the jaws feature a slight taper which gives perfectly parallel clamping. The slide can be positioned anywhere on the T bar using the locating holes drilled at regular intervals along the bar. A large, solid, cold drawn steel pin keeps the slide firmly in position and will not bend or distort under load. Virtually unbreakable, the slide and head have a durable powder coat finish and the head features a solid steel, precision cut, rolled acme screw thread. Highly wear resistant, this screw gives a smooth and rapid clamping action and the strong steel handle gives the user enough leverage to apply the maximum amount of clamping pressure with minimal effort. Both the slide and head feature flat bottoms for unsupported clamping and drilled feet for more permanent bench mounting.

Ideal for jointing large boards for table tops and other large scale applications, these T bar clamps are 60" long with a clamping capacity of 54". Manufactured at the same factory as the most well known brand of T bar clamps.
It is widely acknowledged that the T bar is most resistant to twisting and distortion during clamping and these clamps with their cold drawn steel T bars are no exception. Cold drawn steel has greater tensile and yield strengths than standard hot rolled steel making these clamps capable of heavy duty, high pressure clamping, comfortably exerting up to 1900kg of pressure on the work piece.

The premium quality malleable iron slide and head are both precision machined to glide along the bar for effortless set up and the jaws feature a slight taper which gives perfectly parallel clamping. The slide can be positioned anywhere on the T bar using the locating holes drilled at regular intervals along the bar. A large, solid, cold drawn steel pin keeps the slide firmly in position and will not bend or distort under load. Virtually unbreakable, the slide and head have a durable powder coat finish and the head features a solid steel, precision cut, rolled acme screw thread. Highly wear resistant, this screw gives a smooth and rapid clamping action and the strong steel handle gives the user enough leverage to apply the maximum amount of clamping pressure with minimal effort. Both the slide and head feature flat bottoms for unsupported clamping and drilled feet for more permanent bench mounting.

Ideal for jointing large boards for table tops and other large scale applications, these T bar clamps are 60" long with a clamping capacity of 54". Manufactured at the same factory as the most well known brand of T bar clamps.

Show more +

Specifications

Brand Dakota
Overall Length 60"
Capacity 54"
Bar Type 'T' Section Cold Drawn Steel
Clamping Pressure 1900kg

Show more +
8 5

Customer Reviews

Reviews (8)
Write Review....

Ian Burden

I had to build a floor 9 X 14 feet tried to find out the best to lay these boards and get them tight not sure the best way to do this, and then I come across Rutlands ad for these t-bar clamps as I hadent come up with anything I decided to have a go with these t bar clamps, was a little bit worried about the strength of these clamps as I new there was going to be a lot of pressure on the clamps but they done the job they were excellent
and a very good low price as a bonus thanks Rutlands

Steven Brown

very pleased

Christopher Wilkes

I ordered these as I have a couple of projects in the pipeline, and my current 900 mm clamps where just not big enough. These clamps are heavy, well made and straight. They look as if they are built to work hard and feel confident that they will give me the clamping pressure I need. I had looked at cheaper aluminium alternatives, but not a patch on these.

Peter Elliott

Excellent clamps. Rather on the dirty/greasy side when they arrived and had to be cleaned - don't expect to use them straight from the box without removing the protective oil/grease coating - but otherwise excellent value for money. Just wish I'd gone for the 60" ones now.....

Simon Eales

Making tables and large cabinets, I''ve long been a fan of T bar clamps. Costing 30 percent less than my usual brand, I gave these Dakota ones a try and have to say I''m very impressed. They work and look (almost) identical to my other clamps. I''ll be sticking with the Dakota clamps for any future purchases.

David Fairley

In this day and age you don,t ever get something for nothing, ''you get what you pay for'' as they say,but in this instance ,this is not the case. These t bar sash clamps are the real macoy and realy are a bargain low cost lasting investment, that any workshop would be proud of.

Phillip Elleson

Having picked up a couple of Record T bar clamps at a car boot sale I was instantly struck by how strong they were. I was going to buy some new Record ones to add to my collection but found them a little pricey at 60 each. When I saw these, I thought I'd give them a try as they cost considerably less. I've compared these to my Record clamps and I honestly cannot find any difference in performance for a lot less money.

Kevin Jakeway

I must admit I was sceptical that the quality of these clamps would be as good as stated in the description, but I was wrong to think so. These clamps are excellent value for money and I only wish I had seen them before I bought my previous, much more expensive, versions last year.

Show more +

T Bar Clamp 54" Capacity - Pack of 4

Dakota
Part No. DK136PACK4
£129.95 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • 1st Class Mail UK (Orders below 2kg) - £3.95
  • Next Working Day UK - £6.95
  • 10am Next Working Day UK - £14.95
  • Saturday Next Day UK - £14.95
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >