Precision Guide Rail Clamp - 2750mm Long
£69.95
inc. vat
Key Features
- Made from hardened aluminium extrusion that will not flex or bow
- 2750ml (9 foot) overall length ideal for sawing or routing 8 x 4 sheets with extreme accuracy time after time
- High pressure toggle clamps securely hold the rail to the work piece
- Can be used joined together for large work pieces or used individually for smaller work pieces
- Designed for professional heavy duty use
Bundles
This Item: Precision Guide Rail Clamp - 2750mm Long
£69.95
Product Details
Measuring 2750mm (9 feet) long this guide rail is supplied in two sections for easy transportation and storage. Made from hardened aluminium extrusion, the two sections of 65mm wide rail join seamlessly together using a steel insert bar that locks both sections rigidly together via three allen headed set screws. The guide rail is perfect for straight sawing or routing of 8 x 4 composite material sheets, plasterboard and insulation board. For smaller work pieces simply use one section of the rail.
To clamp the rail to the work piece there are two heavy duty clamps that slide into a T slot. Each clamp can slide the full length of the rail and features an adjustable mechanism to lock the clamp securely in place when positioned. The clamps operate on a toggle basis and will rigidly clamp work pieces up to 40mm thick.
This is an excellent guide rail system that will allow you to guide power tools over long and short work piece lengths with extreme accuracy and stability. ©
To clamp the rail to the work piece there are two heavy duty clamps that slide into a T slot. Each clamp can slide the full length of the rail and features an adjustable mechanism to lock the clamp securely in place when positioned. The clamps operate on a toggle basis and will rigidly clamp work pieces up to 40mm thick.
This is an excellent guide rail system that will allow you to guide power tools over long and short work piece lengths with extreme accuracy and stability. ©
Measuring 2750mm (9 feet) long this guide rail is supplied in two sections for easy transportation and storage. Made from hardened aluminium extrusion, the two sections of 65mm wide rail join seamlessly together using a steel insert bar that locks both sections rigidly together via three allen headed set screws. The guide rail is perfect for straight sawing or routing of 8 x 4 composite material sheets, plasterboard and insulation board. For smaller work pieces simply use one section of the rail.
To clamp the rail to the work piece there are two heavy duty clamps that slide into a T slot. Each clamp can slide the full length of the rail and features an adjustable mechanism to lock the clamp securely in place when positioned. The clamps operate on a toggle basis and will rigidly clamp work pieces up to 40mm thick.
This is an excellent guide rail system that will allow you to guide power tools over long and short work piece lengths with extreme accuracy and stability. ©
To clamp the rail to the work piece there are two heavy duty clamps that slide into a T slot. Each clamp can slide the full length of the rail and features an adjustable mechanism to lock the clamp securely in place when positioned. The clamps operate on a toggle basis and will rigidly clamp work pieces up to 40mm thick.
This is an excellent guide rail system that will allow you to guide power tools over long and short work piece lengths with extreme accuracy and stability. ©
Show more +
Specifications
Brand
Rutlands
Length
9 feet (supplied in two sections)
Width
65mm
Clamping Capacity
Up to 40mm thick
Show more +
2
5
Customer Reviews
Reviews (2)
Write Review....
Michael Tooze
These guide rails are well made and very useful as a router guide. When extended, by joining both sections together, they stay firm and square however the camps are not strong enough to stop them sliding a little when pushed against by a router. I found that I still needed additional clamping to prevent this. However, it is a good product and provides an excellent straight edge which is easy to measure to and set.
Malcolm Taylor
Just bought these clamps so havent had the chanch to use them yet hence the four stars.
I expect these clamps to give the same performance as the 50" clamps.they are really well made,heavy duty and use all the accessories the 50" ones do.the clamps are heavy duty as are the joining plates.
Delivery was next day ,wish all mail order firms were like this.
I expect these clamps to give the same performance as the 50" clamps.they are really well made,heavy duty and use all the accessories the 50" ones do.the clamps are heavy duty as are the joining plates.
Delivery was next day ,wish all mail order firms were like this.
Show more +
50" Clamp Edge Guide - Pack of 2
Premium 50" Clamp Grip Guide with Scale
Featherboard for Clamp Grip Guide
Router Plate for Clamp Grip Guide
£69.95
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- 1st Class Mail UK (Orders below 2kg) - £3.95
- Next Working Day UK - £6.95
- 10am Next Working Day UK - £14.95
- Saturday Next Day UK - £14.95
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process