Pocket Hole Alignment Clamps - Pack of 4
£29.99
inc. vat
Key Features
- Lifetime Warranty
If any clamp fails due to a material or manufacturing defect it will be replaced free of charge - Perfectly Aligned Joints
Make sure the joint is aligned ready to be screwed together - 9.5mm Pin
Fits into the most commonly used pocket holes - Works with the Best
Designed to be used with Rutlands and Kreg pocket hole jigs, among others - Smooth Operation
Rolled acme thread is incredible easy to use - ABS Plastic Construction
High tensile strength and is resistant to impacts and corrosion - Pack of 4
Align all four joints of a frame in one go
Product Details
These pocket hole clamps ensure that the pocket hole joint is perfectly aligned every time, ready to be screwed together. They feature a 9.5mm pin that slots into a pre-drilled pocket which is then clamped under pressure bringing the two mating surfaces tightly together. Once positioned and with the clamp still locked in place you simply drive your screw home in an adjacent pre-drilled pocket hole. By purchasing 4 x clamps at a time you can set out and precisely position all four faces of a frame before inserting any screws. This prevents alignment issues normally associated when clamping one face at a time.
Made from an impact resistant ABS plastic these clamps will enhance the joint and make pocket hole joinery much simpler and more accurate. Each clamp has a 150mm clamping length with a body of 200mm.
Supplied in packs of 4 each clamp comes with a lifetime warranty - if any clamp fails due to a material or manufacturing defect it will be replaced free of charge. ©
Made from an impact resistant ABS plastic these clamps will enhance the joint and make pocket hole joinery much simpler and more accurate. Each clamp has a 150mm clamping length with a body of 200mm.
Supplied in packs of 4 each clamp comes with a lifetime warranty - if any clamp fails due to a material or manufacturing defect it will be replaced free of charge. ©
These pocket hole clamps ensure that the pocket hole joint is perfectly aligned every time, ready to be screwed together. They feature a 9.5mm pin that slots into a pre-drilled pocket which is then clamped under pressure bringing the two mating surfaces tightly together. Once positioned and with the clamp still locked in place you simply drive your screw home in an adjacent pre-drilled pocket hole. By purchasing 4 x clamps at a time you can set out and precisely position all four faces of a frame before inserting any screws. This prevents alignment issues normally associated when clamping one face at a time.
Made from an impact resistant ABS plastic these clamps will enhance the joint and make pocket hole joinery much simpler and more accurate. Each clamp has a 150mm clamping length with a body of 200mm.
Supplied in packs of 4 each clamp comes with a lifetime warranty - if any clamp fails due to a material or manufacturing defect it will be replaced free of charge. ©
Made from an impact resistant ABS plastic these clamps will enhance the joint and make pocket hole joinery much simpler and more accurate. Each clamp has a 150mm clamping length with a body of 200mm.
Supplied in packs of 4 each clamp comes with a lifetime warranty - if any clamp fails due to a material or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands
Clamping Length
150mm
Body Length
200mm
Show more +
4.500
2
5
Customer Reviews
Reviews (2)
Write Review....
Mike Edmonston
Fraser Poole
Works well enough, definitely helps with keeping everything where you want it.
The main problem is the design of the handle, you have to lift the piece off the table to turn it. Would have been much better with a ratcheted lever so everything can stay flat.
Finally, I can't help feel that if instead of the solid plastic plug that goes into the pocket hole it had a thin metal sleeve you might be able to get a screw down there and remove the requirement for an adjacent hole (which you don't always have).
Recommended though, better than using a long clamp.
The main problem is the design of the handle, you have to lift the piece off the table to turn it. Would have been much better with a ratcheted lever so everything can stay flat.
Finally, I can't help feel that if instead of the solid plastic plug that goes into the pocket hole it had a thin metal sleeve you might be able to get a screw down there and remove the requirement for an adjacent hole (which you don't always have).
Recommended though, better than using a long clamp.
Show more +
£29.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- 1st Class Mail UK (Orders below 2kg) - £3.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £14.99
- Saturday Next Day UK - £14.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process
Fantastic addition to my tool collection.