Flexible Angle Drilling and Driving Set
Flexible Angle Drilling and Driving Set
£39.95
inc. vat
Home > Hand Tools > Screwdrivers > Flexible Screwdrivers > Flexible Angle Drilling and Driving Set

Key Features

  • This versatile set contains a Flexishaft Angle Driver with Bit Holder, Flexishaft Magnetic Screwdriver Bit Holder and a Multi Angle Screwdriver Bit Holder
  • You can drill or screw close up to walls and into the tightest of spaces with ease
  • Flexible shafts will bend and reach right where they are needed to
  • Industry standard 1/4" hex shanks will fit into any 1/4" quick change chuck or standard drill chuck
  • The flexishaft and multi angle screwdriver bit holders are magnetised for fast set up and to prevent losing the bit
  • The flexishaft angle driver features a quick change hex chuck allowing fast changes between drilling and driving
  • An essential buy for anyone who does a lot of powered screwdriving

Show more +

Bundles

Product Details

A versatile selection of flexible driving tools allowing you to work at any angle. It is not always possible to get a drill driver or screwdriver where you need it to be or even at the correct angle you want to use it. Driving screws in tight spaces or close to sides of cabinets can be a major problem.

The flexishaft magnetic screwdriver bit holder is the answer to all your problems. Designed for use with a drill driver, this 300mm flexible shaft will bend and reach right where you need it to. At one end is an industry standard 1/4" (6.35mm) hex shank which will fit into any 1/4" quick change chuck, or suitably sized keyed or keyless drill chuck. At the other end is a 1/4" magnetic bit holder that will accept all 1/4" hex shank screwdriver bits. The rotating shaft is housed in an articulated metal sheath which allows any heat build up to dissipate quickly preventing damage to the shaft through overheating. The chuck is magnetised to prevent the bit from falling out. This is an essential buy for anyone who does a lot of powered screwdriving and is faster to use and set up than an angled drill chuck.

The flexishaft angle driver with its 90 degree angle chuck has a slimline head which is mounted on a 300mm flexishaft. You can drill or screw close to walls and into the tightest of spaces with ease. Drilling and screwdriving in tight spaces such as up against cupboard walls is not an easy task but one that has to be done from time to time. Often, the drill driver is too bulky to position correctly, or the location of the screw is just too difficult to access making your job that bit harder. Precision geared, this chuck can be used with both drill drivers and impact drivers. Highly versatile, this chuck will work in both forward and reverse and comes with a handle that can be mounted in two positions to suit how and where you are working. The shaft has a 1/4" hex shank and will fit into any 1/4" quick change hex chuck or standard drill chuck. At the other end of the chuck, a 1/4" quick change hex chuck accepts all standard 1/4" hex shank mounted screwdriver and drill bits. The rotating shaft is housed in an articulated metal sheath which allows any heat build up to dissipate quickly preventing damage to the shaft through overheating.

The multi angle screwdriver bit holder is one of our most popular bit holders as it allows you to drive and remove screws and drill in difficult positions. Featuring a swivel arm that rotates through 360 degrees and tilts through 30 degrees enabling you to access hard to reach areas such as the inside cabinets and cupboards where the drill chuck would normally foul with the walls of the cupboard. It is also favoured when securing door furniture when the handle interferes with the drill chuck. Precision machined from aluminium it features an industry standard 1/4" hex shank magnetised bit holder for holding screwdriver and drill bits and 1/4" hex shank drive for use will all keyed or keyless chucks and quick release bit holders. It measures a total of 100mm in length. This bit holder will prove invaluable when the need arises. Highly recommended.
A versatile selection of flexible driving tools allowing you to work at any angle. It is not always possible to get a drill driver or screwdriver where you need it to be or even at the correct angle you want to use it. Driving screws in tight spaces or close to sides of cabinets can be a major problem.

The flexishaft magnetic screwdriver bit holder is the answer to all your problems. Designed for use with a drill driver, this 300mm flexible shaft will bend and reach right where you need it to. At one end is an industry standard 1/4" (6.35mm) hex shank which will fit into any 1/4" quick change chuck, or suitably sized keyed or keyless drill chuck. At the other end is a 1/4" magnetic bit holder that will accept all 1/4" hex shank screwdriver bits. The rotating shaft is housed in an articulated metal sheath which allows any heat build up to dissipate quickly preventing damage to the shaft through overheating. The chuck is magnetised to prevent the bit from falling out. This is an essential buy for anyone who does a lot of powered screwdriving and is faster to use and set up than an angled drill chuck.

The flexishaft angle driver with its 90 degree angle chuck has a slimline head which is mounted on a 300mm flexishaft. You can drill or screw close to walls and into the tightest of spaces with ease. Drilling and screwdriving in tight spaces such as up against cupboard walls is not an easy task but one that has to be done from time to time. Often, the drill driver is too bulky to position correctly, or the location of the screw is just too difficult to access making your job that bit harder. Precision geared, this chuck can be used with both drill drivers and impact drivers. Highly versatile, this chuck will work in both forward and reverse and comes with a handle that can be mounted in two positions to suit how and where you are working. The shaft has a 1/4" hex shank and will fit into any 1/4" quick change hex chuck or standard drill chuck. At the other end of the chuck, a 1/4" quick change hex chuck accepts all standard 1/4" hex shank mounted screwdriver and drill bits. The rotating shaft is housed in an articulated metal sheath which allows any heat build up to dissipate quickly preventing damage to the shaft through overheating.

The multi angle screwdriver bit holder is one of our most popular bit holders as it allows you to drive and remove screws and drill in difficult positions. Featuring a swivel arm that rotates through 360 degrees and tilts through 30 degrees enabling you to access hard to reach areas such as the inside cabinets and cupboards where the drill chuck would normally foul with the walls of the cupboard. It is also favoured when securing door furniture when the handle interferes with the drill chuck. Precision machined from aluminium it features an industry standard 1/4" hex shank magnetised bit holder for holding screwdriver and drill bits and 1/4" hex shank drive for use will all keyed or keyless chucks and quick release bit holders. It measures a total of 100mm in length. This bit holder will prove invaluable when the need arises. Highly recommended.

Show more +

Specifications

Brand Rutlands
RW1074 & RW1075 Flexishaft Screwdriver Bit Holders
Flexishaft Length 300mm
Chuck 1/4"
Hex Shank 1/4"
RW1077 Multi Angle Screwdriver Bit Holder
Length 100mm
Shank 1/4"

Show more +
5.000 1 5

Customer Reviews

Reviews (1)
Write Review....

Keith Mercer

Bought as was needing to drive screws in tight corner of cabinets and this product worked very well would recommend

Show more +

Flexible Angle Drilling and Driving Set

Rutlands
Part No. RW1074SET3
£39.95 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • 1st Class Mail UK (Orders below 2kg) - £3.95
  • Next Working Day UK - £6.95
  • 10am Next Working Day UK - £14.95
  • Saturday Next Day UK - £14.95
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >