Premium Feather Board
Premium Feather Board
£19.95
inc. vat
Home > New Arrivals > Premium Feather Board

Key Features

  • Lifetime Warranty
    If any feather board fails due to a material or manufacturing defect it will be replaced free of charge
  • For Quick and Easy Parallel Height Adjustments
    Once set in position, feather boards remain parallel to your workpiece whilst you make quick height adjustments
  • Ready to Fit Your Router Table
    With included hex bolts for 6.35mm or 8.3mm T tracks and a mitre slot bar for 19mm T tracks, for mounting securely to a table top or fence
  • Work Safer and More Accurately
    Providing even, consistent pressure closer to the router bit, at the most crucial point
  • Built to Last
    Constructed from high impact moulded plastic, for superior strength whilst maintaining flexibility
  • Designed to Protect Your Workpiece
    Each smooth rounded finger maintains pressure without leaving a mark
  • Available In Either a Single or Double Pack
    Stack two feather boards for supporting taller stock (longer bolts supplied in double pack only)

Show more +

Bundles

Product Details

If you're running stock along the fence of your router table for jobs such as edge profiling or rabbeting then you know the importance of keeping the workpiece on track with constant hand pressure in order to achieve accurate results. This task is quite often made more difficult by the need to change hand positions during the cut and trying to maintain the same feed rate, all whilst keeping your personal safety in mind. These premium feather boards solve all these problems, by providing even, consistent pressure on your workpiece up against the fence. These premium feather boards allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.

Manually setting feather boards parallel to the material or fence can be a time consuming task made longer when using different sized stock. The premium design of these feather boards allows you to make quick height adjustments whilst staying in parallel alignment with the workpiece and fence, essential for accurate routing. Simply set the position of the feather board using the two outer knobs to tighten into place, with either the included hex bolts or mitre slot bar. Feather board height is then adjusted using the two inner knobs, allowing it to move independently of the mounting body. The feather board can be extended up to a length of 100mm from the mounting body. The length of the feather board can also be extended further, up to 140mm from the mounting body by simply turning the mounting body around inserting the feather board into the opposite end.

With a face height of 13mm, each finger features a smooth rounded edge designed to leave no marks on your workpiece. Measuring 130mm wide each feather board provides a large surface area for applying even pressure against your workpiece. Constructed from high impact plastic, these premium feather boards offer exceptional strength and impact resistance whilst retaining the flexibility to withstand the most heavy-duty of tasks.

Whilst ideal for routing these versatile aids can also be used on table saws, band saws or any other stationary cutting tool. Included in the kit are hex bolts for securing to a 6.35mm or 8.3mm T track and a mitre slot bar for fitting into a 19mm T track. Also available in a double pack with longer bolts for stacking two feather boards. These feather boards have a lifetime warranty and in the event that a feather board fails due to a material or manufacturing defect it will be replaced free of charge.
If you're running stock along the fence of your router table for jobs such as edge profiling or rabbeting then you know the importance of keeping the workpiece on track with constant hand pressure in order to achieve accurate results. This task is quite often made more difficult by the need to change hand positions during the cut and trying to maintain the same feed rate, all whilst keeping your personal safety in mind. These premium feather boards solve all these problems, by providing even, consistent pressure on your workpiece up against the fence. These premium feather boards allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.

Manually setting feather boards parallel to the material or fence can be a time consuming task made longer when using different sized stock. The premium design of these feather boards allows you to make quick height adjustments whilst staying in parallel alignment with the workpiece and fence, essential for accurate routing. Simply set the position of the feather board using the two outer knobs to tighten into place, with either the included hex bolts or mitre slot bar. Feather board height is then adjusted using the two inner knobs, allowing it to move independently of the mounting body. The feather board can be extended up to a length of 100mm from the mounting body. The length of the feather board can also be extended further, up to 140mm from the mounting body by simply turning the mounting body around inserting the feather board into the opposite end.

With a face height of 13mm, each finger features a smooth rounded edge designed to leave no marks on your workpiece. Measuring 130mm wide each feather board provides a large surface area for applying even pressure against your workpiece. Constructed from high impact plastic, these premium feather boards offer exceptional strength and impact resistance whilst retaining the flexibility to withstand the most heavy-duty of tasks.

Whilst ideal for routing these versatile aids can also be used on table saws, band saws or any other stationary cutting tool. Included in the kit are hex bolts for securing to a 6.35mm or 8.3mm T track and a mitre slot bar for fitting into a 19mm T track. Also available in a double pack with longer bolts for stacking two feather boards. These feather boards have a lifetime warranty and in the event that a feather board fails due to a material or manufacturing defect it will be replaced free of charge.

Show more +

Specifications

Brand Rutlands
Material High impact moulded plastic
Feather Board Width Up to 140mm
Feather Board Face Height 13mm
Track Hardware Hex bolts for 6.35mm or 8.3mm T track and slot bar for 19mm T track

Show more +
5.000 4 5

Customer Reviews

Reviews (4)
Write Review....

Floyd Summers

Wonderful featherboards. I replaced all the ones that came with my old router table and they work much better. They clamp really tight into the track and you can get massive range if you need to

Henk V Harten

This is a smart design, and its rugged construction of high grade plastic wont let you down, even after years of usage.

Milan Hosek

Best feather boards around just because they are easiest to set up and they are easy to set up because they are self squaring, I have not seen other self squaring fether bords on market.

Warren Wright

After trying about 3 other featherboards ,non of which really impressed me ,i tried these.should have got these in the 1st place.they're miles better than any thing else out there.well worth that bit extra money cos they're not the cheapest. Just got 1 to test but will get more

Show more +

Premium Feather Board

Rutlands
Part No. R5014
£19.95 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • 1st Class Mail UK (Orders below 2kg) - £3.95
  • Next Working Day UK - £6.95
  • 10am Next Working Day UK - £14.95
  • Saturday Next Day UK - £14.95
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >