Premium Router Table with Router Lift and Motor
£799.95
inc. vat
Key Features
- Lifetime Warranty
If any router table fails due to a material or manufacturing defect it will be replaced free of charge - Premium Performance Router Table Package
Including table top, table stand, fence, router lift and motor (feather boards not included) - Thick 27mm Phenolic Laminate Top
Effortlessly smooth, hard wearing finish with great impact resistance that will stay perfectly flat during its lifetime - Router Lift With Side Mounted Handle
Precisely "dial in" the router bit height to match a mark on the work piece, to an accuracy of 0.04mm - Powerful 2400 Watt Motor
With variable speed control, capable of high levels of torque with rotational speeds of between 10,000 and 20,000rpm - Large 800 x 600mm Work Surface
Route all sizes of work piece including long boards with complete confidence and ease - 8.3mm and 19mm T Tracks
Inset across the length of the work surface, for the mounting of mitre gauges, feather boards, stops and other accessories - Easily Adjustable Fence
Make quick, tool free adjustments using two measuring scales on either side of the table to ensure that the fence is set squarely
Bundles
This Item: Premium Router Table with Router Lift and Motor
£799.95
Premium Feather Board
£19.95
This Item: Premium Router Table with Router Lift and Motor
£799.95
Product Details
Everything you need for a complete professional quality routing experience including a router table top, table stand, fence, router lift and router motor. You now have full control of the workpiece rather than a heavy router, making jobs such as the routing of smaller or thinner stock much quicker and safer, the table is equally adept when routing larger work. This premium router table allows you expand your routing possibilities by using larger diameter bits too big to control in a handheld router. Any router bit over 38mm in diameter is not recommended for use in a handheld router.
The large 800x600mm table top is laminated on both sides for durability with a thick external grade high pressure laminate, sandwiched around a solid moisture resistant composite core. This 27mm thick moisture resistant core prevents the absorption of atmospheric moisture that leads to distortion of your work surface, while the high pressure laminate surface prevents premature wear and tear. The overall result is an incredibly strong, smooth routing surface that will stay flat during its lifetime and provide an effortlessly smooth feeling as you slide your workpiece across the table. Set into the work surface is a full length extruded aluminium double T track, 19mm and 8.3mm in width for accepting mitre gauges, stops, feather boards and other accessories. Extruded aluminium is heat treated to provide an incredibly robust, smooth surface for your tracks that will not corrode over time.
The 90mm high fence features a high quality phenolic laminate sub-fence, providing a hard-wearing anti-friction surface to feed your workpiece along. Each side of the table features an imperial and metric slidable scale, to zero the fence relative to the centre of router bit, the cutting edge or any other reference required. Stored in T tracks behind the fence are 2 offset bars for offsetting the outfeed fence when using the router table to edge joint boards. On the reverse of the fence are two 8.3mm T tracks, for mounting accessories such as the Rutlands R5012 router table sliding carriage.
The premium 2400 watt router motor (3¼ hp) with variable speed control is capable of high levels of torque allowing it to maintain its rotational speed even when routing hardwoods or end grain. The premium router lift enables you to smoothly raise and lower your router without removing it from the table, allowing you to make precise height adjustments to an accuracy of 0.05mm. By making height adjustments from the side of the table and not above the table, you can alter the bit height with the workpiece still on the router table top, particularly useful when "dialling in" the router bit height to match a mark on the workpiece. The thick solid aluminium router lift plate features an insert opening of 90mm for accommodating large diameter bits such as raised panel bits, and an included insert ring to reduce the opening to 50mm.
The phenolic laminate top sits on a strong 38mm box section steel frame with a durable black finish. At the bottom sit 4 levelling feet for precise adjustment with a no-mar rubber finish, for accurate results even on uneven flooring. This router table has a lifetime warranty and in the event that it should fail due to a material or manufacturing defect the component will be replaced free of charge. This excludes the router motor which is instead covered by our standard electrical goods warranty. ©
* Please note: table shown with optional feather boards
The large 800x600mm table top is laminated on both sides for durability with a thick external grade high pressure laminate, sandwiched around a solid moisture resistant composite core. This 27mm thick moisture resistant core prevents the absorption of atmospheric moisture that leads to distortion of your work surface, while the high pressure laminate surface prevents premature wear and tear. The overall result is an incredibly strong, smooth routing surface that will stay flat during its lifetime and provide an effortlessly smooth feeling as you slide your workpiece across the table. Set into the work surface is a full length extruded aluminium double T track, 19mm and 8.3mm in width for accepting mitre gauges, stops, feather boards and other accessories. Extruded aluminium is heat treated to provide an incredibly robust, smooth surface for your tracks that will not corrode over time.
The 90mm high fence features a high quality phenolic laminate sub-fence, providing a hard-wearing anti-friction surface to feed your workpiece along. Each side of the table features an imperial and metric slidable scale, to zero the fence relative to the centre of router bit, the cutting edge or any other reference required. Stored in T tracks behind the fence are 2 offset bars for offsetting the outfeed fence when using the router table to edge joint boards. On the reverse of the fence are two 8.3mm T tracks, for mounting accessories such as the Rutlands R5012 router table sliding carriage.
The premium 2400 watt router motor (3¼ hp) with variable speed control is capable of high levels of torque allowing it to maintain its rotational speed even when routing hardwoods or end grain. The premium router lift enables you to smoothly raise and lower your router without removing it from the table, allowing you to make precise height adjustments to an accuracy of 0.05mm. By making height adjustments from the side of the table and not above the table, you can alter the bit height with the workpiece still on the router table top, particularly useful when "dialling in" the router bit height to match a mark on the workpiece. The thick solid aluminium router lift plate features an insert opening of 90mm for accommodating large diameter bits such as raised panel bits, and an included insert ring to reduce the opening to 50mm.
The phenolic laminate top sits on a strong 38mm box section steel frame with a durable black finish. At the bottom sit 4 levelling feet for precise adjustment with a no-mar rubber finish, for accurate results even on uneven flooring. This router table has a lifetime warranty and in the event that it should fail due to a material or manufacturing defect the component will be replaced free of charge. This excludes the router motor which is instead covered by our standard electrical goods warranty. ©
* Please note: table shown with optional feather boards
Everything you need for a complete professional quality routing experience including a router table top, table stand, fence, router lift and router motor. You now have full control of the workpiece rather than a heavy router, making jobs such as the routing of smaller or thinner stock much quicker and safer, the table is equally adept when routing larger work. This premium router table allows you expand your routing possibilities by using larger diameter bits too big to control in a handheld router. Any router bit over 38mm in diameter is not recommended for use in a handheld router.
The large 800x600mm table top is laminated on both sides for durability with a thick external grade high pressure laminate, sandwiched around a solid moisture resistant composite core. This 27mm thick moisture resistant core prevents the absorption of atmospheric moisture that leads to distortion of your work surface, while the high pressure laminate surface prevents premature wear and tear. The overall result is an incredibly strong, smooth routing surface that will stay flat during its lifetime and provide an effortlessly smooth feeling as you slide your workpiece across the table. Set into the work surface is a full length extruded aluminium double T track, 19mm and 8.3mm in width for accepting mitre gauges, stops, feather boards and other accessories. Extruded aluminium is heat treated to provide an incredibly robust, smooth surface for your tracks that will not corrode over time.
The 90mm high fence features a high quality phenolic laminate sub-fence, providing a hard-wearing anti-friction surface to feed your workpiece along. Each side of the table features an imperial and metric slidable scale, to zero the fence relative to the centre of router bit, the cutting edge or any other reference required. Stored in T tracks behind the fence are 2 offset bars for offsetting the outfeed fence when using the router table to edge joint boards. On the reverse of the fence are two 8.3mm T tracks, for mounting accessories such as the Rutlands R5012 router table sliding carriage.
The premium 2400 watt router motor (3¼ hp) with variable speed control is capable of high levels of torque allowing it to maintain its rotational speed even when routing hardwoods or end grain. The premium router lift enables you to smoothly raise and lower your router without removing it from the table, allowing you to make precise height adjustments to an accuracy of 0.05mm. By making height adjustments from the side of the table and not above the table, you can alter the bit height with the workpiece still on the router table top, particularly useful when "dialling in" the router bit height to match a mark on the workpiece. The thick solid aluminium router lift plate features an insert opening of 90mm for accommodating large diameter bits such as raised panel bits, and an included insert ring to reduce the opening to 50mm.
The phenolic laminate top sits on a strong 38mm box section steel frame with a durable black finish. At the bottom sit 4 levelling feet for precise adjustment with a no-mar rubber finish, for accurate results even on uneven flooring. This router table has a lifetime warranty and in the event that it should fail due to a material or manufacturing defect the component will be replaced free of charge. This excludes the router motor which is instead covered by our standard electrical goods warranty. ©
* Please note: table shown with optional feather boards
The large 800x600mm table top is laminated on both sides for durability with a thick external grade high pressure laminate, sandwiched around a solid moisture resistant composite core. This 27mm thick moisture resistant core prevents the absorption of atmospheric moisture that leads to distortion of your work surface, while the high pressure laminate surface prevents premature wear and tear. The overall result is an incredibly strong, smooth routing surface that will stay flat during its lifetime and provide an effortlessly smooth feeling as you slide your workpiece across the table. Set into the work surface is a full length extruded aluminium double T track, 19mm and 8.3mm in width for accepting mitre gauges, stops, feather boards and other accessories. Extruded aluminium is heat treated to provide an incredibly robust, smooth surface for your tracks that will not corrode over time.
The 90mm high fence features a high quality phenolic laminate sub-fence, providing a hard-wearing anti-friction surface to feed your workpiece along. Each side of the table features an imperial and metric slidable scale, to zero the fence relative to the centre of router bit, the cutting edge or any other reference required. Stored in T tracks behind the fence are 2 offset bars for offsetting the outfeed fence when using the router table to edge joint boards. On the reverse of the fence are two 8.3mm T tracks, for mounting accessories such as the Rutlands R5012 router table sliding carriage.
The premium 2400 watt router motor (3¼ hp) with variable speed control is capable of high levels of torque allowing it to maintain its rotational speed even when routing hardwoods or end grain. The premium router lift enables you to smoothly raise and lower your router without removing it from the table, allowing you to make precise height adjustments to an accuracy of 0.05mm. By making height adjustments from the side of the table and not above the table, you can alter the bit height with the workpiece still on the router table top, particularly useful when "dialling in" the router bit height to match a mark on the workpiece. The thick solid aluminium router lift plate features an insert opening of 90mm for accommodating large diameter bits such as raised panel bits, and an included insert ring to reduce the opening to 50mm.
The phenolic laminate top sits on a strong 38mm box section steel frame with a durable black finish. At the bottom sit 4 levelling feet for precise adjustment with a no-mar rubber finish, for accurate results even on uneven flooring. This router table has a lifetime warranty and in the event that it should fail due to a material or manufacturing defect the component will be replaced free of charge. This excludes the router motor which is instead covered by our standard electrical goods warranty. ©
* Please note: table shown with optional feather boards
Show more +
Specifications
Brand
Rutlands
Table Top Dimensions
800mm x 600mm
Work Surface Material
High pressure phenolic laminate
Fence Height
90mm
Fence Material
Extruded aluminium
Sub-Fence Height
65mm
Sub-Fence Surface Material
High pressure phenolic laminate
Fence Length
Adjustable from 910mm to 1150mm
Fence Travel
375mm
Insert Plate Size
298mm x 235mm
Insert Plate Material
Aluminium
T Track Widths
19mm and 8.3mm
Motor Power Input Rating
2400 watt (3 1/4 hp)
Motor Power Output Rating
1800 watt
Included Collets
1/2" and 1/4"
Motor Rotational Speed
Between 10,000 and 22,000rpm
Overall Length
800mm
Overall Width
600mm
Overall Height
900mm
Dust Port Diameter
63mm
Show more +
5.000
4
5
Customer Reviews
Reviews (4)
Write Review....
Rob
I bought this router table to use with large raised panel cutters for making new door fronts for our kitchen. My old Trend table was too small and did not have the stability to work with large cutters. This table is excellent as the top is large enough to support the doors without me supporting them. Changing cutter height is easy as you simply spin the handle and you have immediate access to the collet. I have added a shelf to the stand and boxed it in on three sides and added two doors to the front. Looks the dogs b****cks.
Kirk Cowan
Was debating over a few different tables however the reviews swayed me and I have to say the praise is deserved. What you get is a real quality routing package and I almost feel unworthy using it as Im not a serious woodworker I just enjoy spending my spare time creating things. So far I've produced some beautiful tongue and groove planter boxes for the garden and everything has performed fantastically. Well done rutlands this is a really top quality piece of equipment.
Jonathan Mcclure
An very impressive collection. This really does feel 'premium' and clearly a lot of thought has gone into its design. The fence is excellent, the best fence Ive used on any machine in terms of quality and precision, it can be set with complete accuracy without requiring endless measuring and remeasuring. I've so far tested it on pine, cedar and even oak, a heavy grain hardwood and the motor has made light work of every cut. If you're even half serious about routing you owe it to yourself to see what this table is about I can guarantee you won't look back.
wes
was packaged very well considering how many parts there were, built it in about half an hour and have already got everything set up as I like, great so far
Show more +
Heavy Duty Fully Rotational Castors with Brake - 50mm Pack of 4
T Bar Clamps - 1200mm - Pack of 4
T Bar Clamps - 1650mm - Pack of 4
Steel Sash Clamps - 900mm - Pack of 6
Steel Sash Clamps - 1200mm - Pack of 6
Steel Sash Clamps - 1500mm - Pack of 6
Aluminium Sash Clamps - 500mm - Pack of 6
Aluminium Sash Clamps - 800mm - Pack of 6
Aluminium Sash Clamps - 1100mm - Pack of 6
Aluminium Sash Clamps - 1400mm - Pack of 6
Aluminium Sash Clamps with Feet - 600mm - Pack of 4
Aluminium Sash Clamps with Feet - 900mm - Pack of 4
Aluminium Sash Clamps with Feet - 1200mm - Pack of 4
Aluminium Sash Clamps with Feet - 1500mm - Pack of 4
Parallel Jaw Clamps - 300mm x 95mm - Pack of 4
Parallel Jaw Clamps - 600mm x 95mm - Pack of 4
Parallel Jaw Clamps - 800mm x 95mm - Pack of 4
Parallel Jaw Clamps - 1200mm x 95mm - Pack of 4
Parallel Jaw Clamps - 1500mm x 95mm - Pack of 4
Sash Clamp Heads - Pack of 4
Forged F Clamps - 150mm x 80mm - Pack of 6
Forged F Clamps - 300mm x 80mm - Pack of 6
Forged F Clamps - 600mm x 80mm - Pack of 6
Forged F Clamps - Large - 300mm x 120mm - Pack of 4
Forged F Clamps - Large - 600mm x 120mm - Pack of 4
Forged Quick Lever Clamps - 160mm x 80mm - Pack of 4
Forged Quick Lever Clamps - 300mm x 80mm - Pack of 4
Forged Quick Lever Guide Rail Clamps - 300mm x 60mm - Pack of 4
Malleable Cast Iron F Clamps - 150mm X 80mm - Pack of 10
Malleable Cast Iron F Clamps - 300mm x 80mm - Pack of 10
Malleable Cast Iron F Clamps - 600mm x 80mm - Pack of 10
Malleable Cast Iron F Clamps - Large - 300mm x 120mm - Pack of 6
Malleable Cast Iron F Clamps - Large - 600mm x 120mm - Pack of 6
Ductile Cast Iron F Clamps - 150mm x 80mm - Pack of 6
Ductile Cast Iron F Clamps - 300mm x 80mm - Pack of 6
Ductile Cast Iron F Clamps - 600mm x 80mm - Pack of 6
Ductile Cast Iron F Clamps - Large - 300mm x 120mm - Pack of 6
Ductile Cast Iron F Clamps - Large - 600mm x 120mm - Pack of 6
One Hand Bar Clamps - 150mm x 85mm - Pack of 4
One Hand Bar Clamps - 300mm x 85mm - Pack of 4
One Hand Bar Clamps - 600mm x 85mm - Pack of 4
Aluminium One Hand Bar Clamps - 150mm x 85mm - Pack of 4
Aluminium One Hand Bar Clamps - 300mm x 85mm - Pack of 4
Aluminium One Hand Bar Clamps - 600mm x 85mm - Pack of 4
Ratchet Hand Clamps - 60mm - Pack of 6
Ratchet Hand Clamps - 100mm - Pack of 6
Steel Spring Clamps - 25mm - Pack of 20
Steel Spring Clamps - 50mm - Pack of 10
Steel Spring Clamps - 75mm - Pack of 10
Spring Clamps - 50mm - Pack of 20
Spring Clamps - 75mm - Pack of 20
Forged G Clamps - 100mm - Pack of 10
Forged G Clamps - 150mm - Pack of 10
Forged G Clamps - 200mm - Pack of 6
Forged G Clamps - 250mm - Pack of 6
3 Way Edge G Clamps - 60mm x 70mm - Pack of 6
Panel Clamp - 4 Way
Clamping Squares - 100mm x 100mm - Pack of 20
Clamping Squares - 150mm x 150mm - Pack of 10
Clamping Squares - 200mm x 200mm - Pack of 10
Woodworking Quick Release Vice - 175mm
Woodworking Quick Release Vice - 230mm
Woodworking Quick Release Vice - 265mm
Woodworking Vice with Clamp - 150mm
Woodworking Front Vice - 260mm
Woodworking Tail Vice Screw - 260mm
Workshop Vice - 100mm
Workshop Multi Purpose Vice - 125mm
Workshop Multi Purpose Vice with Clamp - 63mm
Drill Press Vice - 100mm
Mitre Angle Clamp - 56mm
Mitre Angle Clamp - 106mm
Fast Jaw Face Frame Clamp - 75mm
Fast Jaw Face Frame Clamp - 150mm
Fast Jaw Pocket Hole Assembly Clamp
Spring Mitre Clamp Kit
Fast Jaw 90 Degree Corner Clamp
Face Frame Clamp - Single
Right Angle 90 Degree Clamp - Single
Horizontal Toggle Clamp - Auto Adjust Technology - 40mm
Horizontal Toggle Clamp - Auto Adjust Technology - 60mm
In Line Toggle Clamp - Auto Adjust Technology - 20mm
Horizontal Toggle Clamp with Angle Base Plate - Auto Adjust Technology - 40mm
In Line Toggle Clamp with Angle Base Plate - Auto Adjust Technology - 20mm
Horizontal Toggle Clamp with Vertical Base Plate - Auto Adjust Technology - 40mm
Vacuum Clamp Set
Extra Wide Clamp Cutting Guide - 600mm
Extra Wide Clamp Cutting Guide - 900mm
Extra Wide Clamp Cutting Guide -1250mm
Precision 1/4" Router - 710W Variable Speed
Offset Base for Precision 1/4" Router
Tilting Base for Precision 1/4" Router
Premium Router Table Aluminium Insert Plate
Premium Double Feather Board
Premium Bench Top Router Table with Insert Plate
Premium Router Lift
Premium Router Lift Motor - 2400w Variable Speed
Premium Dovetail Jig
Dovetail Jig
Premium Mitre Gauge
Premium Grip Blocks - Pack of 12
Lock Morticer
Premium Router Table with Insert Plate
Premium Bench Top Router Table with Router Lift and Motor
Premium Router Lift & Motor
Precision 1/4" Router with 18 Piece TCT Router Bit Set
Precision 1/4" Router with Offset and Tilting Bases
Premium Steel Pocket Hole Jig Kit
Premium Aluminium Pocket Hole Jig Kit
Premium Aluminium Mini Pocket Hole Jig
Premium Aluminium Self-Centering Dowel Jig
Premium Aluminium Dowel Jig Kit
Premium Aluminium Drill Guide
Premium Aluminium Dual Marking Gauge
Premium Router Radius Templates
Premium Aluminium Clamping Square - 120mm x 120mm
Premium Aluminium Mini Clamping Square - 100mm x 50mm
Premium Aluminium Circular Drill Guide
Premium Aluminium Cabinet Handle Jig
Premium 10mm Dowel Jig
Premium Self-Centering Doweling Jig
Premium Drawer Slide Jig - Pack of 2
Premium Dual Angle Pocket Hole Jig
Pocket Hole Connector Kit
Pocket Hole Plugs - Oak - Pack of 100
Pocket Hole Plugs - Pine - Pack of 100
T Track - 19mm x 1000mm - Pack of 2
T Track - 8.3mm x 1000mm - Pack of 2
Dovetail T Track - 8.3mm x 1000mm - Pack of 2
Scale T Track - 8.3mm x 1000mm - Pack of 2
Scale T Track - 19mm x 1000mm - Pack of 2
Double T Track - 19mm and 8.3mm x 1000mm - Pack of 2
Edge T Track - 8.3mm x 1000mm - Pack of 2
T Track 4 Way Connector Kit - 8.3mm
T Track 4 Way Connector Kit - 19mm
T Track Slider Bar Kit - 19mm x 38mm - Pack of 2
T Track Slider Bar Kit - 19mm x 63mm - Pack of 2
T Track Slider Bar Kit - 19mm x 120mm - Pack of 2
T Track Hardware Kit 60 Piece - 19mm and 8.3mm
Self Adhesive Tape Metric - Left Hand - 3000mm
Self Adhesive Tape Metric - Right Hand - 3000mm
Pack of 100 x Rare Earth Magnets
Electric 18g Nailer and Stapler
18V Li-ion Cordless 18g Nailer and Stapler with Charger and Battery
Mini Table Saw
Workshop and Kitchen Stool with Swivel Seat
Chisel Hammer - Solid Brass - 280g
Woodturning Pen Kit - No 1 and No 2 Morse Taper
Granite Surface Plate - 300mm x 225mm x 50mm
£799.95
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- 1st Class Mail UK (Orders below 2kg) - £3.95
- Next Working Day UK - £6.95
- 10am Next Working Day UK - £14.95
- Saturday Next Day UK - £14.95
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process