Premium Router Sled
Premium Router Sled
£69.95
inc. vat

Key Features

  • Used when routing the end grain of a narrow workpiece such as rail and stile doors
  • An excellent coping sled that is easy to set up, glides effortlessly and holds the stock rigidly in position to give clean feather free cuts
  • Features a large, smooth sliding, phenolic base ensuring stability and control
  • This sled features a clear guide that slides along the router fence, using it as its reference
  • Toggle clamp has tool free adjustment and can be operated with one hand with a clamping capacity of 30mm
  • Accept workpiece widths up to 150mm wide
  • Two 110mm tall round handles allow for a firm grip and are positioned to allow for any angle of approach

Show more +

Bundles

Product Details

When routing the end grain of a narrow workpiece such as rail and stile doors it is imperative that the workpiece is held both securely and safely to achieve precise results. Our new coping sled features a large smooth sliding, phenolic base ensuring stability and control whilst a premium quality toggle clamp holds the stock firmly against the fence, allowing rails to travel through the router bit ensuring clean and square cuts.

This new sled uses the router fence as its reference, so unlike sleds that use mitre tracks, you do not have to waste time aligning the mitre slot parallel with the fence. A 50mm high clear guide rail is elevated on two steel rods and overhangs the phenolic base of the sled and acts as the reference by running against the router fence. The clear overhang guide eliminates the risk of cutting into the phenolic base of the sled and offers excellent visibility. The two 110mm tall round handles allow for a firm grip and are positioned to allow for any angle of approach. The phenolic base is 10mm thick and features a large, stable surface area measuring 320mm x 200mm. The toggle clamp has tool free adjustment and can be operated with one hand with a maximum clamping capacity of 30mm. The sliding block can be adjusted to accept workpiece widths up to 150mm wide and is held in position with a T bolt and knob. A sacrificial block can be positioned between the block and the workpiece to prevent end grain blowout.

If you work with rail and stile router bits to make kitchen and cupboard doors or route with thin stock this is an excellent sled that is easy to set up, glides effortlessly and holds the stock rigidly in position to give clean feather free cuts every time. Highly recommended for all woodworkers using a router table.
When routing the end grain of a narrow workpiece such as rail and stile doors it is imperative that the workpiece is held both securely and safely to achieve precise results. Our new coping sled features a large smooth sliding, phenolic base ensuring stability and control whilst a premium quality toggle clamp holds the stock firmly against the fence, allowing rails to travel through the router bit ensuring clean and square cuts.

This new sled uses the router fence as its reference, so unlike sleds that use mitre tracks, you do not have to waste time aligning the mitre slot parallel with the fence. A 50mm high clear guide rail is elevated on two steel rods and overhangs the phenolic base of the sled and acts as the reference by running against the router fence. The clear overhang guide eliminates the risk of cutting into the phenolic base of the sled and offers excellent visibility. The two 110mm tall round handles allow for a firm grip and are positioned to allow for any angle of approach. The phenolic base is 10mm thick and features a large, stable surface area measuring 320mm x 200mm. The toggle clamp has tool free adjustment and can be operated with one hand with a maximum clamping capacity of 30mm. The sliding block can be adjusted to accept workpiece widths up to 150mm wide and is held in position with a T bolt and knob. A sacrificial block can be positioned between the block and the workpiece to prevent end grain blowout.

If you work with rail and stile router bits to make kitchen and cupboard doors or route with thin stock this is an excellent sled that is easy to set up, glides effortlessly and holds the stock rigidly in position to give clean feather free cuts every time. Highly recommended for all woodworkers using a router table.

Show more +

Specifications

Brand Rutlands
Material Phenolic
Size 320mm x 200mm
Clamping Capacity 30mm

Show more +
0 5

Customer Reviews

Reviews (0)
Write Review....

Show more +

Premium Router Sled

Rutlands
Part No. RW1130
£69.95 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • 1st Class Mail UK (Orders below 2kg) - £3.95
  • Next Working Day UK - £6.95
  • 10am Next Working Day UK - £14.95
  • Saturday Next Day UK - £14.95
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >