Premium Double Feather Board
Premium Double Feather Board
£29.95
inc. vat

Key Features

  • Lifetime Warranty
    If any feather board fails due to a material or manufacturing defect it will be replaced free of charge
  • For Quick and Easy Parallel Height Adjustments
    Once set in position, feather boards remain parallel to your workpiece whilst you make quick height adjustments
  • Ready to Fit Your Router Table
    With the included 6.35mm T track hex bolts and 19.1mm mitre slot bar, for mounting securely to the table top or fence
  • Work Safer and More Accurately
    Providing even, consistent pressure closer to the router bit, at the most crucial point
  • Built to Last
    Constructed from high impact moulded plastic, for superior strength whilst maintaining flexibility
  • Designed to Protect Your Workpiece
    Each smooth rounded finger maintains pressure without leaving a mark
  • Use Individually or Stacked Together
    Use the supplied longer bolts to stack two feather boards for supporting taller stock

Show more +

Bundles

Product Details

This double premium feather board kit includes 2 complete feather board assemblies and longer bolts for stacking, ideal for supporting taller workpieces. If you're running stock along the fence of your router table for jobs such as edge profiling or rabbeting then you know the importance of keeping the workpiece on track with constant hand pressure in order to achieve accurate results. This task is quite often made more difficult by the need to change hand positions during the cut and trying to maintain the same feed rate, all whilst keeping your personal safety in mind. These premium feather boards are an essential tool in solving this problem, by providing even, consistent pressure on your workpiece up against the fence. These premium feather boards allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.

Manually setting feather boards parallel to the material or fence can be a time consuming task made longer when using different sized stock. The premium design of these feather boards allows you to make quick height adjustments whilst staying in parallel alignment with the workpiece and fence, essential for accurate routing. Simply set the position of the feather board using the two outer knobs to tighten into place, with either the included hex bolts or mitre slot bar. Feather board height is then adjusted using the two inner knobs, allowing it to move independently of the mounting body. The feather board can be extended up to a length of 100mm from the mounting body. The length of the feather board can also be extended further, up to 140mm from the mounting body by simply turning the mounting body around inserting the feather board into the opposite end.

With a face height of 13mm, each finger features a smooth rounded edge designed to leave no marks on your workpiece. Measuring 130mm wide each feather board provides a large surface area for applying even pressure against your workpiece. Feather boards can be stacked using the longer bolts supplied, for the support of taller stock. When stacked the total height of the face is 37mm. Constructed from high impact plastic, these premium feather boards offer exceptional strength and impact resistance whilst retaining the flexibility to withstand the most heavy duty of tasks.

Whilst ideal for routing these versatile aids can also be used on table saws, band saws or any other stationary cutting tool. Included in the kit are hex bolts for securing to a 6.35mm T track, a mitre slot bar for fitting into a 19.1mm mitre track and longer bolts for the stacking of 2 feather boards. This feather board has a lifetime warranty and in the event that a feather board fails due to a material or manufacturing defect it will be replaced free of charge.
This double premium feather board kit includes 2 complete feather board assemblies and longer bolts for stacking, ideal for supporting taller workpieces. If you're running stock along the fence of your router table for jobs such as edge profiling or rabbeting then you know the importance of keeping the workpiece on track with constant hand pressure in order to achieve accurate results. This task is quite often made more difficult by the need to change hand positions during the cut and trying to maintain the same feed rate, all whilst keeping your personal safety in mind. These premium feather boards are an essential tool in solving this problem, by providing even, consistent pressure on your workpiece up against the fence. These premium feather boards allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.

Manually setting feather boards parallel to the material or fence can be a time consuming task made longer when using different sized stock. The premium design of these feather boards allows you to make quick height adjustments whilst staying in parallel alignment with the workpiece and fence, essential for accurate routing. Simply set the position of the feather board using the two outer knobs to tighten into place, with either the included hex bolts or mitre slot bar. Feather board height is then adjusted using the two inner knobs, allowing it to move independently of the mounting body. The feather board can be extended up to a length of 100mm from the mounting body. The length of the feather board can also be extended further, up to 140mm from the mounting body by simply turning the mounting body around inserting the feather board into the opposite end.

With a face height of 13mm, each finger features a smooth rounded edge designed to leave no marks on your workpiece. Measuring 130mm wide each feather board provides a large surface area for applying even pressure against your workpiece. Feather boards can be stacked using the longer bolts supplied, for the support of taller stock. When stacked the total height of the face is 37mm. Constructed from high impact plastic, these premium feather boards offer exceptional strength and impact resistance whilst retaining the flexibility to withstand the most heavy duty of tasks.

Whilst ideal for routing these versatile aids can also be used on table saws, band saws or any other stationary cutting tool. Included in the kit are hex bolts for securing to a 6.35mm T track, a mitre slot bar for fitting into a 19.1mm mitre track and longer bolts for the stacking of 2 feather boards. This feather board has a lifetime warranty and in the event that a feather board fails due to a material or manufacturing defect it will be replaced free of charge.

Show more +

Specifications

Brand Rutlands
Material High impact moulded plastic
Feather Board Width 130mm
Feather Board Length Up to 140mm
Feather Board Face Height 13mm
Stacked Face Height 37mm
Track Hardware 6.35mm T track hex bolts and 19.1mm mitre slot bar

Show more +
5.000 3 5

Customer Reviews

Reviews (3)
Write Review....

guy russell

had a play with these this afternoon and for the first time I ever I found myself not needing to sand my edges, definitely more than a safety item. feel very sturdy dont I dont plan on putting too much pressure on them anyway otherwise the woods too tight to move

Mitchell Waller

Used these on both my table saw and router table & everything felt a lot stronger and safer, the fact they stay parallel all the time puts them ahead of other feather boards for me, even if you already have some feather boards these are worth the upgrade

willian buckley

really nice kit not too much hassle to go from single feather board to double

Show more +

Premium Double Feather Board

Rutlands
Part No. R5015
£29.95 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • 1st Class Mail UK (Orders below 2kg) - £3.95
  • Next Working Day UK - £6.95
  • 10am Next Working Day UK - £14.95
  • Saturday Next Day UK - £14.95
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >