Mitre Set Standard - Mitre Gauge Setup Aid
Mitre Set Standard - Mitre Gauge Setup Aid
£89.95
inc. vat
Home > Power Tools > Routers > Mitre Gauges > Mitre Set Standard - Mitre Gauge Setup Aid

Key Features

  • Quickly and easily sets your mitre gauge to precise angles for cutting perfect mitre joints every time
  • Your standard mitre gauge will now cut perfect mitre joints with no gaps, no sanding and no waste
  • Eliminate annoying gaps, time spent sanding and wasted material
  • The hole numbers are laser-etched for years of readability
  • The foam-filled plastic case protects MiterSet between uses
  • Made in USA and Patent protected
  • Accepts all industry standard mitre gauges used in 3/4" slots

Show more +

Bundles

Total: £169.80inc. vat
This Item: Mitre Set Standard - Mitre Gauge Setup Aid
£89.95

Product Details

Cutting mitre joints on a table saw can be hard. A standard mitre gauge just doesn't offer the precision required to set accurate angles. More often than not you end up with annoying gaps, time spent sanding and wasted material. Now you can combine MiterSet with your standard mitre gauge.

MiterSet quickly and easily sets your mitre gauge to precise angles for cutting perfect mitre joints every time. MiterSet is an aluminium plate bisected by a mitre gauge slot which features hole patterns for setting left and right angles up to 52.5. The number pattern on each plate sector represents 5 on your mitre gauge. Slide your mitre gauge into the mitre slot. Place one pin at 00 and the other pin in the numbered hole that represents the degree angle you want to cut - right or left. Now slide your mitre gauge against the two pins and lock it down. It's that simple.

Your mitre gauge will now cut perfect mitre joints with no gaps, no sanding and no waste. The detent bar is notched from .5 to 2.5 in .5 increments. Place the detent bar against the pins and allow the detent bar to recess against the angle that you would like to cut. For example, when the pin is set at 20 degrees and the detent bar is set at 2.5 degrees the total angle is 22.5 degrees. Slide your mitre gauge against the detent bar and lock it down.

The set includes the MiterSet plate with a neoprene rubber backing, two x tapered pins, aluminium detent bar and a protective plastic carry case.

Made in the USA this product fits all standard mitre gauges that require a 3/4" mitre slot. US Patent 742178 and exclusive to Rutlands in the United Kingdom.

* Mitre gauge sold separately
Cutting mitre joints on a table saw can be hard. A standard mitre gauge just doesn't offer the precision required to set accurate angles. More often than not you end up with annoying gaps, time spent sanding and wasted material. Now you can combine MiterSet with your standard mitre gauge.

MiterSet quickly and easily sets your mitre gauge to precise angles for cutting perfect mitre joints every time. MiterSet is an aluminium plate bisected by a mitre gauge slot which features hole patterns for setting left and right angles up to 52.5. The number pattern on each plate sector represents 5 on your mitre gauge. Slide your mitre gauge into the mitre slot. Place one pin at 00 and the other pin in the numbered hole that represents the degree angle you want to cut - right or left. Now slide your mitre gauge against the two pins and lock it down. It's that simple.

Your mitre gauge will now cut perfect mitre joints with no gaps, no sanding and no waste. The detent bar is notched from .5 to 2.5 in .5 increments. Place the detent bar against the pins and allow the detent bar to recess against the angle that you would like to cut. For example, when the pin is set at 20 degrees and the detent bar is set at 2.5 degrees the total angle is 22.5 degrees. Slide your mitre gauge against the detent bar and lock it down.

The set includes the MiterSet plate with a neoprene rubber backing, two x tapered pins, aluminium detent bar and a protective plastic carry case.

Made in the USA this product fits all standard mitre gauges that require a 3/4" mitre slot. US Patent 742178 and exclusive to Rutlands in the United Kingdom.

* Mitre gauge sold separately

Show more +

Specifications

Brand Rutlands

Show more +
5.000 1 5

Customer Reviews

Reviews (1)
Write Review....

Brad Villinga

I bought the Mitreset on a recent business trip to Minneapolis. I have an 15 year old Scheppach bench saw that has served me very well, however I spend considerable time calibrating and setting up the fence and mitre gauge each use. I have to make numerous test cuts before the live cut. This jig is so simple to use and you can not fail but to set the correct angle. I wish it had been available years early. Still no cure for my fence though - maybe in the future!

Show more +

Mitre Set Standard - Mitre Gauge Setup Aid

Rutlands
Part No. DK7518
£89.95 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • 1st Class Mail UK (Orders below 2kg) - £3.95
  • Next Working Day UK - £6.95
  • 10am Next Working Day UK - £14.95
  • Saturday Next Day UK - £14.95
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >