Digital Tools Pack of 3 - Angle Box, Depth Gauge and 2 in 1 Rule
Digital Tools Pack of 3 - Angle Box, Depth Gauge and 2 in 1 Rule
£34.95
inc. vat
Home > Hand Tools > Measuring > Angle & Depth Gauges > Digital Tools Pack of 3 - Angle Box, Depth Gauge and 2 in 1 Rule

Key Features

  • This Digital Tools Pack contains:
  • 2 in 1 Digital Angle Rule - DK2057...
  • Measures angles to an accuracy of 0.1 degrees on an LED display
  • Digital Depth Gauge - DK7502...
  • Set the height of router bits and saw blades to an accuracy of 0.1mm
  • Digital Angle Box - DK7503...
  • Perfect for setting up cutting angles on mitre saws, table saws and bandsaws

Show more +

Bundles

Product Details

This Digital Tools Pack contains....

2 in 1 Digital Angle Rule - DK2057...

A handy device that is both workshop rule and angle gauge, this 2 in 1 digital angle rule will prove invaluable when setting up fences, blades and workshop machinery. Consisting of two 160mm long steel rules that are joined together by a digital angle reader, this angle rule will display measured angles clearly on the LCD display to a resolution of 0.1 degrees. The steel rules are etched with both inch and metric scales. The inch scales run from 0 - 5" in 1/32" graduations along each rule whereas the metric scales run from 0 - 130mm in 1mm increments. With an open length of 320mm, this rule has a locking knob allowing the rules to be locked in any position. Supplied with battery.


Digital Depth Gauge - DK7502...

This digital depth gauge tool has been designed specifically for woodworkers to set saw blade and router bit height as well as the distance from a router fence to the bit. A large easy to view LCD display reads in inches, fractions or millimetres. Precise accuracy can be achieved as millimetres are displayed in 0.1mm increments, decimal inches are displayed in .002" increments and fractions are displayed using Precise Fraction Technology which gives you four times the accuracy of other fractional readouts. The steel locking rule allows for repeat settings and features both a metric and an imperial scale.

A removable pin allows for measuring holes or mortice depths up to 50mm. Magnetic feet make the gauge self standing for ease of use and it has the added benefit of a low profile for back fence adjustments. You can switch between the pre-set and zero set measurement modes for total accuracy. The measuring range is 0 to 80mm and the gauge has an internal width of 60mm. Supplied with an extra long life battery and an auto shut off for preserving battery life.


Digital Angle Box - DK7503...

This is the latest advancement in angle sensor technology and is designed to self-calibrate if ever dropped by accident. The display read-out automatically inverts when measuring overhead, allowing the operator to view the measurement the correct way up. Accurate to 0.1 of a degree the LCD read-out has a back display light for easy vision. Rare earth magnets built into the base of the box will lock rigidly onto saw blades and router cutters enabling hands-free operation of the machine for fast and correct angle set up. The box measures 60mm x 60mm x 25mm and is powered by 1 x AAA battery with auto shut off after 5 minutes. The zero button determines the angle change from the initial measurement. This digital angle box will prove invaluable in the work shop when setting up machinery and on-site when laying out steels and structures. Supplied with a carry pouch and battery.

* Please note: the Digital Tape Measure shown in the video is not included in this pack
This Digital Tools Pack contains....

2 in 1 Digital Angle Rule - DK2057...

A handy device that is both workshop rule and angle gauge, this 2 in 1 digital angle rule will prove invaluable when setting up fences, blades and workshop machinery. Consisting of two 160mm long steel rules that are joined together by a digital angle reader, this angle rule will display measured angles clearly on the LCD display to a resolution of 0.1 degrees. The steel rules are etched with both inch and metric scales. The inch scales run from 0 - 5" in 1/32" graduations along each rule whereas the metric scales run from 0 - 130mm in 1mm increments. With an open length of 320mm, this rule has a locking knob allowing the rules to be locked in any position. Supplied with battery.


Digital Depth Gauge - DK7502...

This digital depth gauge tool has been designed specifically for woodworkers to set saw blade and router bit height as well as the distance from a router fence to the bit. A large easy to view LCD display reads in inches, fractions or millimetres. Precise accuracy can be achieved as millimetres are displayed in 0.1mm increments, decimal inches are displayed in .002" increments and fractions are displayed using Precise Fraction Technology which gives you four times the accuracy of other fractional readouts. The steel locking rule allows for repeat settings and features both a metric and an imperial scale.

A removable pin allows for measuring holes or mortice depths up to 50mm. Magnetic feet make the gauge self standing for ease of use and it has the added benefit of a low profile for back fence adjustments. You can switch between the pre-set and zero set measurement modes for total accuracy. The measuring range is 0 to 80mm and the gauge has an internal width of 60mm. Supplied with an extra long life battery and an auto shut off for preserving battery life.


Digital Angle Box - DK7503...

This is the latest advancement in angle sensor technology and is designed to self-calibrate if ever dropped by accident. The display read-out automatically inverts when measuring overhead, allowing the operator to view the measurement the correct way up. Accurate to 0.1 of a degree the LCD read-out has a back display light for easy vision. Rare earth magnets built into the base of the box will lock rigidly onto saw blades and router cutters enabling hands-free operation of the machine for fast and correct angle set up. The box measures 60mm x 60mm x 25mm and is powered by 1 x AAA battery with auto shut off after 5 minutes. The zero button determines the angle change from the initial measurement. This digital angle box will prove invaluable in the work shop when setting up machinery and on-site when laying out steels and structures. Supplied with a carry pouch and battery.

* Please note: the Digital Tape Measure shown in the video is not included in this pack

Show more +

Specifications

Brand Rutlands
DK2057 2 in 1 Digital Angle Rule
DK2057 - Open Length 320mm
DK2057 - Metric Scales 0 - 130mm in 1mm increments
DK2057 - Imperial Scales 0 - 5" in 1/32" graduations
DK7502 Digital Depth Gauge
DK7502 - Units Metric and Imperial
DK7502 - Maximum Height Reading 80mm
DK7502 - Maximum Depth Reading 50mm
DK7502 - Maximum Opening Width 60mm
DK7503 Digital Angle Box
DK7503 - Accuracy 0.1
DK7503 - Dimensions 60mm x 60mm x 25mm
DK7503 - Weight 0.082kg

Show more +
19 5

Customer Reviews

Reviews (19)
Write Review....

T Roberts

Bought this digital read out box a couple of weeks ago and I have used it every day since. I have never trusted the graduate scale on my Makita chop saw, so this saves me loads of time and prevents me from wasting money on incorrect cuts. Ordered it on a Monday and arrived Tuesday at 9.30am. Can't beat that.

James Priory

Excellent for use with my sliding mitre saw. Display is very clear and it is so quick to use. Great tool.

Paul Hattersley

I use my digital box on my Dewalt mitre saw. It is quick and simple to set up and being magnetic you can tilt the blade and see the reading move to your required angle of cut. Brilliant, simple tool.

John Sloan

Quality item,very accurate and a great price. Dispatch was really fast.Read out is excellent,plus a strong magnet. A good investment for my workshop. Has made one or two of my other angle checkers redundant! Recommended.*

T.H.

I use this box when setting out RSJ's. The digital display is very clear even in bright daylight and the magnets are extremely strong. Great product.

Mr James H

Fantastic little measuring device. The magnets are very powerful and the read out is very clear.

J Simpson

Perfect tool for use with my router table. Large display allows me to read without my glasses. One of those tools that you wonder how you did without.

Roger Lane

Makes setting the depth of cut on my Makita router fast and simple. I also use it for setting the height on my bench saw. The magnets are very powerful and lock onto the saw bed for one hand set up. Arrived in 24 hours.

Charles Morland

For many years I've used a manual depth guage, particularly for setting router cutter depths on both freehand and table mounted routers. I finally decided to splash out on a digital model and having used it wish I'd bought one years ago. A great workshop time saver.

N Clarke

This has become one of most used tools in the workshop. It is amazing how many applications it has. Half the price of the Trend version as well.

Mr T T

Great for use with my old Elu router. Saves fumbling around with a rule trying to read measurements upside down.

John Basten

This seems identical to the Trend depth gauge that sells for a lot more. Works really well on my router table. Would have preferred larger feet so it could self stand easier.

D York

Any tool that makes my marking out simple and more accurate saves me time and money. Fantastic lay out tool that I can fully recommend.

Peter Turner

As a second fix joiner I fit door frames on a daily basis. This tool allows me to quickly and accurately set the frame out. Very simple to use and really clear display.

Charles Morland

Good piece of kit. Easy to use and well worth the money.
I've just used it set angles to cut some shelves to fit in an out of square cupboard. It's much quicker and easier to use than my old bevel guage

Allan Madwar

one gets a whole new angle instead of guesswork

Henry Tempest

Great product, easy to use, accurate read out and arrived next day, one very happy customer, thanks!

I B

excellent product very sensitive digital read out and easy to use.

S Rae

This Is Easier To Use Than A Protractor When Marking Out And Better Than A Bevel Guage For Measuring Angles. Good Stuff Rutlands.

Show more +

Digital Tools Pack of 3 - Angle Box, Depth Gauge and 2 in 1 Rule

Rutlands
Part No. DIGITALPACK3
£34.95 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • 1st Class Mail UK (Orders below 2kg) - £3.95
  • Next Working Day UK - £6.95
  • 10am Next Working Day UK - £14.95
  • Saturday Next Day UK - £14.95
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >