This premium bench top router table provides the ultimate portable routing experience, compact in size without compromising on performance. Not every woodworker is lucky enough to have the space in their workshop for a full sized router table. Get professional quality results whilst retaining the portability of smaller woodworking machines.

The 600 x 400mm work surface is laminated on both sides for durability with a thick external grade high pressure laminate, sandwiched around a solid moisture resistant composite core. This 27mm thick moisture resistant core prevents the absorption of atmospheric moisture that leads to distortion of your work surface, while the high pressure laminate surface prevents premature wear and tear. The overall result is an incredibly strong, smooth routing surface that will stay flat during its lifetime and provide an effortlessly smooth feeling as you slide your workpiece across the table. With strong edge banding for superior durability and impact resistance, this table top is tough enough to withstand the most demanding of users, whether you're a busy tradesman or budding enthusiast. Set into the work surface is an extruded aluminium 19mm T track for accepting mitre gauges, stops, feather boards and other accessories. Extruded aluminium is heat treated to provide an incredibly robust, smooth surface for your tracks that will not corrode over time. Whether clamping feather boards or sliding along mitre gauges, your track will stay smooth to operate every single time.

The 298 x 235mm solid aluminium router plate is 10mm thick and provides a strong mounting surface for your plunge or fixed based router. The router plate features an insert opening of 95mm, and two insert rings to reduce the opening to 50mm or 35mm. The 35mm insert ring has a counter bored hole to accept 27mm guide bushings. Set into the plate is a starting guide pin with free-spinning plastic barrel, a must for freehand or pattern shaping work. This useful aid allows you to control the start of your cut, by slowly pivoting your workpiece into contact with the router bit reducing the risk of tear out or dangerous kickback.

The included 65mm high fence also features a high quality phenolic laminate top, providing a hard wearing anti-friction surface to feed your workpiece along. The length of the fence can be adjusted from 600mm to 700mm, with the opening ranging from 25mm to 125mm to accommodate all sizes of router bits. With 125mm of travel, the position of the fence is adjusted quickly and easily with no tools required, simply by turning the two tall, easily accessible knobs on either end. Stored in T tracks behind the fence are 2 offset bars for offsetting the outfeed fence when using the router table to edge joint boards. A height adjustable clear plastic bit guard sits in an 8.3mm T track above the fences, which can also be used for mounting feather boards.

This router table offers excellent dust collection with an included 63mm dust port on the rear of the fence and a large underbody dust bag with a further 63mm dust port and fixing straps for attaching to the sturdy 32mm tubular frame. Two handy storage bags attach securely to the side of the base, allowing you to keep your routing accessories within arm's reach. Underneath the frame sit 4 levelling feet for precise adjustment. Mounted to the front of the unit is an NVR switch connected to a power socket and 2.8 metre power cord. This bench top router table has a lifetime warranty and in the event that it should fail due to a material or manufacturing defect the component will be replaced free of charge. ©

* Please note: table shown with optional feather boards

---

This premium bench top router table provides the ultimate portable routing experience, compact in size without compromising on performance. Not every woodworker is lucky enough to have the space in their workshop for a full sized router table. Get professional quality results whilst retaining the portability of smaller woodworking machines.

The 600 x 400mm work surface is laminated on both sides for durability with a thick external grade high pressure laminate, sandwiched around a solid moisture resistant composite core. This 27mm thick moisture resistant core prevents the absorption of atmospheric moisture that leads to distortion of your work surface, while the high pressure laminate surface prevents premature wear and tear. The overall result is an incredibly strong, smooth routing surface that will stay flat during its lifetime and provide an effortlessly smooth feeling as you slide your workpiece across the table. With strong edge banding for superior durability and impact resistance, this table top is tough enough to withstand the most demanding of users, whether you're a busy tradesman or budding enthusiast. Set into the work surface is an extruded aluminium 19mm T track for accepting mitre gauges, stops, feather boards and other accessories. Extruded aluminium is heat treated to provide an incredibly robust, smooth surface for your tracks that will not corrode over time. Whether clamping feather boards or sliding along mitre gauges, your track will stay smooth to operate every single time.

The 298 x 235mm solid aluminium router plate is 10mm thick and provides a strong mounting surface for your plunge or fixed based router. The router plate features an insert opening of 95mm, and two insert rings to reduce the opening to 50mm or 35mm. The 35mm insert ring has a counter bored hole to accept 27mm guide bushings. Set into the plate is a starting guide pin with free-spinning plastic barrel, a must for freehand or pattern shaping work. This useful aid allows you to control the start of your cut, by slowly pivoting your workpiece into contact with the router bit reducing the risk of tear out or dangerous kickback.

The included 65mm high fence also features a high quality phenolic laminate top, providing a hard wearing anti-friction surface to feed your workpiece along. The length of the fence can be adjusted from 600mm to 700mm, with the opening ranging from 25mm to 125mm to accommodate all sizes of router bits. With 125mm of travel, the position of the fence is adjusted quickly and easily with no tools required, simply by turning the two tall, easily accessible knobs on either end. Stored in T tracks behind the fence are 2 offset bars for offsetting the outfeed fence when using the router table to edge joint boards. A height adjustable clear plastic bit guard sits in an 8.3mm T track above the fences, which can also be used for mounting feather boards.

This router table offers excellent dust collection with an included 63mm dust port on the rear of the fence and a large underbody dust bag with a further 63mm dust port and fixing straps for attaching to the sturdy 32mm tubular frame. Two handy storage bags attach securely to the side of the base, allowing you to keep your routing accessories within arm's reach. Underneath the frame sit 4 levelling feet for precise adjustment. Mounted to the front of the unit is an NVR switch connected to a power socket and 2.8 metre power cord. This bench top router table has a lifetime warranty and in the event that it should fail due to a material or manufacturing defect the component will be replaced free of charge. ©

* Please note: table shown with optional feather boards

---

Specifications

Customer Reviews

---

Show more +